Coaxial
High Power Amplifier
ZHL-100W-13+
50Ω
100W 800 to 1000 MHz
Features
• saturated power 100W typ.
• wide bandwidth, usable 750 to 1050 MHz
• high gain, 50 dB typ.
• good gain flatness, 1dB typ.
• unconditionally stable
• self protected against excessive drive, high case temp., reverse polarity and shorting/
unshorting
• can withstand short and open circuit at output while delivering 100 watts
LZHL-100W-13X+
BT1689
Model No.
Case Style
Connectors
ZHL-100W-13+
IN-SMA, OUT-N-Type
Applications
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
• AM/FM
• multi-carrier amplification
• broadband swept signal
• linear pulse
• feed forward
Product Description
ZHL-100W-13+ is a Class-AB, unconditionally stable amplifier. It features a ruggedized case, the ability to withstand accidental open or short at output and
reverse bias protection for added reliability under difficult conditions.
Electrical Specifications at 25°C
ZHL-100W-13+
L ZHL-100W-13X+
Parameter
Condition (MHz)
Min.
Typ.
Max.
Units
Frequency Range
Gain1
800
—
1000
MHz
800 - 1000
800 - 1000
800 - 1000
45
—
50
1.0
+49
57
1.5
—
dB
dB
Gain Flatness
Output Power at 1dB compression
Output Power at 3dB compression
+47.5
dBm
800 - 1000
+48.5
+50
—
dBm
Noise Figure
Output third order intercept point2
800 - 1000
800 - 1000
800 - 1000
800 - 1000
—
+52
—
7
10
—
dB
dBm
:1
+60
1.3
1.4
284
10
Input VSWR
1.6
1.6
30
Output VSWR
—
:1
DC Supply Voltage
Supply Current3
—
V
—
14.5
A
LHeat sink and fan not included. Alternative heat sinking and heat removal must be pro-
vided by the user to limit maximum base-plate temperature to 60°C, in order to ensure
proper performance. For reference, this requires thermal resistance of user’s external
heat sink to be 0.035°C/W max.
1. Small signal input power -15 dBm typ.
2. Two tones, 40 dBm/tone, 1 MHz spacing.
3. Power supply should be capable of delivering 17A at start up.
4. Recommended Operating Voltage.
Maximum Ratings
Parameter
Operating Temperature
Base Plate Temperature
Storage Temperature
DC Voltage
Ratings
-20°C to 45°C
60°C
-55°C to 100°C
30V
Input RF Power (no damage)
+7 dBm
Permanent damage may occur if any of these limits are exceeded.
Notes
REV. A
M151107
ZHL-100W-13+
ED-14590/2
WZ/CP/AM
151029
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
®
Mini-Circuits
Page 2 of 4
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com