ZADCS146/ZADCS147
12-Bit, 200ksps, 8-Channel, Serial Output ADC
Datasheet
Features
Description
ZADCS146 and ZADCS147 are low power, 12-bit, succes-
sive approximation analog-to-digital (A/D) converters with
up to 200ksps conversion rate, 8-channel input multi-
plexer, high-bandwidth track/hold and synchronous serial
interface.
•
Single Supply Operation:
+ 2.7V … + 5.25V
•
8-Channel Single-Ended or
4-Channel Differential Inputs
•
•
•
•
•
Up to 200ksps Conversion Rate
± 1 LSB INL and DNL
The ADC operates from a single + 2.7V to + 5.25V supply.
Its analog inputs are software configurable for unipo-
lar/bipolar and single-ended/differential operation.
No Missing Codes
The 4-wire serial interface connects directly to SPI™/
(QSPI™ and MICROWIRE™) devices without external
logic.
True fully differential Operation
Software-Configurable Unipolar or
Bipolar output coding
Both devices can use either the external serial-interface
clock or an internal clock to perform successive-
approximation analog-to-digital conversions. The internal
clock can be used to run independent conversions on
more than one device in parallel.
•
Internal 3.2MHz oscillator for independent
operation from external clock
•
•
Internal 2.5V Reference
Low Power
The ZADC146 is equipped with a highly accurate internal
2.5V reference with an additional external ±1.5% voltage
adjustment range.
-
-
< 1.2mA (200ksps, 5V supply)
< 0.5μA (power-down mode)
•
SPITM / QSPITM / MICROWIRETM - compatible
4-Wire Serial Interface
ZADCS146 / ZADCS147 provide a hard-wired shut-down
pin (nSHDN) pin and software-selectable power-down
modes that can be programmed to automatically shut
down the IC at the end of a conversion. Accessing the
serial interface automatically powers up the IC. A quick
turn-on time allows the device to be shut down between all
conversions.
•
•
20-Pin SSOP
Alternate Source for MAX146 / MAX147
Applications
•
•
•
•
Data Acquisition
Industrial Process Control
Portable Data Logging
Battery-Powered Systems
Starterkit
available
Functional Block Diagram
CH0
CH1
SAR
8-Channel
CH2
CH3
CH4
CH5
CH6
CH7
Analog
Input
Comparator
IN+
IN-
nCS
+
Serial
Interface
and
Multiplexer
DAC with
inherent
T&H
SCLK
DIN
DOUT
SSTRB
-
Control
State
COM
nSHDN
Internal
3.2 MHz
Oscillator
x 2.000
Machine
+ 1.25V
Reference
VDD
REFADJ
VREF
DGND
AGND
Available in ZADCS146 only
Copyright © 2008, ZMD AG, Rev. 1.1
All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The
Information furnished in this publication is preliminary and subject to changes without notice.
1/19