Z90209/203/202
Z90209/203/202
TELEVISION CONTROLLERS
FEATURES
ROM
RAM*
(Kbyte)
236
236
236
Speed Package
■ Part
Z90209
Z90203
Z90202
(KB)
16
16
8
(MHz)
Type
■ On-Screen Display (OSD) Logic Circuits
6
6
6
124-Pin PGA
42-Pin SDIP
42-Pin SDIP
■ One 14-Bit and One 108-Bit Pulse Width Modulator
(PWM) Circuits
*General-Purpose
■ 20 Input/Output Lines
■ 4.5V to 5.5V Operating Range
■ Program Memory, Video RAM, and Register File
■ 0°C to +70°C Temperature Range
■ Low-Power Consumption
Address Spaces
■ Two On-Chip Counter/Timers
GENERAL DESCRIPTION
The Z9020X Family of Digital Television Controllers are
cost-effective members of the Z8® single-chip
microcontroller family. The devices provides an ideal
performance and reliability solution for consumer and
industrial television applications.
Threebasicaddressspaces, TheProgramMemory, Video
RAM, and Register File, support a wide range of memory
configurations.
For applications demanding powerful I/O capabilities, the
Z9020X's dedicated input and output lines are grouped
into three ports, and are configurable under software
controltoprovidetiming, statussignals, parallelI/Oandan
address/data bus for interfacing to external memory.
TheZ90209istheROMlessIn-CircuitEmulation(ICE)Chip
version of the Z90200 Digital Television Controller Family
used in emulators and development boards.
The device features an 8-bit internal data path controlled
by a Z8 microcontroller, On-Screen Display (OSD) logic
circuits, and Pulse Width Modulators (PWM). On-chip
peripherals include two register mapped I/O ports (Ports 2
and Port 3), interrupt control logic (one software, two
external and three internal interrupts) and a standby mode
recovery input port (Port 3, pin P30).
To unburden the program from coping with the real-time
problemssuchascounting/timinganddatacommunication,
the Z9020X offers two on-chip counter/timers with a large
number of user selectable modes.
Notes:
All Signals with a preceding front slash, "/", are active Low, e.g.:
B//W (WORD is active Low); /B/W (BYTE is active Low, only).
The OSD control circuits support ten rows by 24 columns
ofcharacters.Thecharactercolorisspecifiedbycharacter.
The OSD inter-row spacing is variable and can be
programmed from 0 to 15 horizontal scan lines. The OSD
iscapableofdisplayinghighresolution(14x18dotpattern)
characters.
Power connections follow conventional descriptions below:
Connection
Circuit
Device
Power
Ground
VCC
GND
VDD
VSS
A 14-bit PWM port provides enough voltage resolution for
a voltage synthesizer tuning system. Ten 8-bit PWM ports
are used for controlling audio signal levels to vary picture
levels.
245