TM
ICmic
512 x 8 bit
This X76F400 device has been acquired by
IC MICROSYSTEMS from Xicor, Inc.
IC MICROSYSTEMS
4K
X76F400
Secure SerialFlash
FEATURES
DESCRIPTION
•64-bit password security
•One array (496 bytes) two passwords (16 bytes)
The X76F400 is a password access security supervisor,
containing one 3968-bit Secure Serial Flash array.
—Read password
—Write password
Access to the memory array can be controlled by two 64-bit
passwords. These passwords protect read and
write operations of the memory array.
•Programmable passwords
•Retry counter register
The X76F400 features a serial interface and software
protocol allowing operation on a popular 2-wire bus.
—Allows 8 tries before clearing of the array
•32-bit response to reset (RST input)
•8 byte sector write mode
The bus signals are a clock input (SCL) and a bi-directional
data input and output (SDA).
•1MHz clock rate •2-wire
serial interface •Low
power CMOS
The X76F400 also features a synchronous response to
reset, providing an automatic output of a hard-wired
—2.5 to 5.5V operation
—Standby current less than 1µA
—Active current less than 3 mA
32-bit data stream, thereby meeting the industry standard
for memory cards.
The X76F400 utilizes Xicor’s proprietary Direct Write™
•High reliability endurance:
—100,000 write cycles
cell, providing a minimum endurance of 100,000
cycles and a minimum data retention of 100 years.
•Data retention: 100 years
•Available in:
—8-lead, SOIC,TSSOP
BLOCK DIAGRAM
Retry Counter
Data Transfer
Erase Logic
SCL
SDA
Array Access
Enable
Interface
Logic
496 Byte
EEPROM Array
Password Array
and Password
Verification Logic
RST
ISO Reset
Response Register
Characteristics subject to change without notice. 1 of 14
REV 1.0 7/5/00
www.icmic.com