DSMZ (Z-Foil)
Vishay Foil Resistors
Ultra High Precision Bulk Metal® Z-Foil Surface Mount Voltage
Divider, TCR Tracking of < 0.1 ppm/°C, PCR of ꢀ ppm
at Rated Power and Stability of 0.00ꢀ ꢁ (ꢀ0 ppm)
FEATURES
Temperature coefficient of resistance (TCR):
Absolute: 0.05 ppm/°C typ. (0 °C to + 60 °C)
0.2 ppm/°C typ. (- 55 °C to + 125 °C, + 25 °C Ref.)
Tracking: 0.1 ppm/°C typical
Power coefficient tracking
“R due to self heating”: 5 ppm at rated power
INTRODUCTION
Bulk Metal® Z-Foil technology out-performs all other resistor
Power rating at 70 °C: entire package: 0.1 W,
each resistor: 0.05 W
technologies available today for applications that require
ultra-high precision and ultra-high stabilitly.
Tolerance: absolute: 0.02 %; match: 0.01 %
Ratio stability: 0.005 % (0.05 W at 70 °C, 2000 h)
Resistance range: 100 to 10 k per resistor
Large variety of resistance ratios: 1:100
Foil resistors are not restricted to standard values/ ratios;
specific “as required” values/ratios can be supplied at no
extra cost or delivery (e.g. 1K234/2K345 vs. 1K/2K)
Electrostatic discharge (ESD) up to 25 000 V
Short time overload 0.005 %
Non-inductive, non-capacitive design
Rise time: 1 ns effectively no ringing
Current noise: < - 40 dB
Thermal EMF: 0.05 µV/°C typical
Voltage Coefficient: < 0.1 ppm/V
The Z-Foil technology provides a significant reduction of the
resistive element’s sensitivity to ambient temperature
variations (TCR) and to self heating when power is applied
(power coefficient).
The DSMZ offers low TCR (both absolute and tracking), low
PCR, excellent load life stability, tight tolerance match,
excellent ratio stability, low thermal EMF, and low current
noise - all in one package.
The DSMZ surface mount divider provides a matched pair of
Bulk Metal® Z-Foil resistors in a small epoxy molded
package. The electrical specification of this integrated
construction offers improved performance and better real
estate utilization over discrete resistors and matched pairs.
Non Inductive: < 0.08 µH
Non Hot Spot Design
Terminals: silver coated copper alloy
Compliant to RoHS directive 2002/95/EC
Prototype quantities available in just 5 working days
or sooner. For more information, please contact
foil@vishaypg.com
Our application engineering department is available to
advise and make recommendations. For non-standard
technical requirements and special applications, please
contact us.
For better performances, please contact application
engineering
TABLE 1 - RESISTANCE VALUES AND
TOLERANCES (1)
APPLICATIONS
R2
RESISTANCE VALUES
100 to 10 k per resistor (2)
Instrumentation amplifiers
Bridge networks
ABSOLUTE TOLERANCE
EACH RESISTOR
0.02 %, 0.05 %, 0.1 %
R1
Vin
-
Differential amplifiers
Ratio arms in bridge circuits
Medical and test equipment
Military
Vout
RESISTANCE
TOLERANCE MATCH
0.01 %, 0.02 %, 0.05 %
+
DSMZ
Absolute: (typical and maximum
spread): 0.2 2.0 ppm/°C
TCR
Airborne etc.
Tracking: (maximum)
- 55 °C to + 125 °C
(+ 25 °C reference)
For R1/R2 = 1
0.5 ppm/°C
1.0 ppm/°C
FIGURE 2 - POWER DERATING CURVE
For 1 < R1/R2 10
110
100
90
80
70
60
50
40
30
20
10
0
For 10 < R1/R2 100 2.0 ppm/°C
Notes
(1)
(2)
Tighter performances are available
100 to 12 k per resistor available in DSM
FIGURE 1 - SCHEMATIC
R1
R2
- 60 - 40 - 20
- 55
0
20
40
60
80 100 120 140
OPTION 1
SAME OHMIC VALUE,
OPTION 2
70
125
RESISTOR PAIR
R1/R2 - DIFFERENT VALUES
Ambient Temperature (°C)
SAME ABSOLUTE TOLERANCE
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 63121
Revision: 25-Mar-10
For any questions, contact: foil@vishaypg.com
www.foilresistors.com
1