1
Optoway
XPB-2960LWG
***********************************************************************************************************************************************************************
XPB-2960LWG
(RoHS Compliant)
1330 nm TX / 1270 nm RX , 10.3 Gbps 1-Fiber Single-Mode LC XFP Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
ò 1-Fiber Bi-Directional XFP Optical Transceiver
ò Up to 10.3 Gbps Bi-directional Data Links
ò Complaint with XFP MSA
ò Compliant to IEEE 802.3ae 10GBASE-BX
ò SFF-8472 Digital Diagnostic Function
ò Simplex LC Connector
XPB-2960LWG series transceiver is designed for
bi-directional serial optical data communications such as
IEEE 802.3ae 10GBASE-BX by using 1330 nm transmitter
and 1270 nm receiver.
The transceiver consists of two sections: The transmitter
section users a multiple quantum well 1330 nm DFB laser
and is a class 1 laser compliant according to International
Safety Standard IEC 60825. The receiver section uses an
integrated 1270nm detector preamplifier (IDP) mounted in
an optical header and a limiting post-amplifier IC.
The module is with the XFP 30-pin connector to allow
hot plug capability. Integrated Tx and Rx signal conditioners
provide high jitter-tolerance for full XFI compliance and no
external reference clock required. The internally ac coupled
high speed serial I/O simplifies interfacing to external
circuitry. Only single 3.3V power supply is needed. The
optical output can be disabled by LVTTL logic high-level
input of TX_DIS. Loss of signal (RX_LOS) output is
provided to indicate the loss of an input optical signal of
receiver.
ò 1330 nm DFB LD Transmitter
ò 1270 nm Receiver
ò Distance up to 60km
ò 2-Wire Interface for Integrated Digital Diagnostic
Monitoring
ò XFI Loopback Mode
ò No reference Clock required
ò Only Required +3.3 V Power Supply
ò Power Consumption < 2 W
ò RoHS Compliant
ò 0 to 70oC Operating
ò Simplex LC Connector
APPLICATIONS
ò 10GBASE-BX at 10.3125 Gb/s
ò 10GBASE-BX at 9.953 Gb/s
A serial EEPROM in the transceiver allows the user to
access transceiver digital diagnostic monitoring and
configuration data via the 2-wire XFP Management
Interface. This interface uses a single address, A0h, with a
memory map divided into a lower and upper area. Basic
digital diagnostic data is held in the lower area while specific
data is held in a series of tables in the high memory area.
LASER SAFETY
This single-mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
Bit Rate
(Gb/s)
P/No.
FC-PI-4 Distance
(km)
TX
(nm)
RX
Package
Temp
(oC)
RoHS
Compliant
Yes
(nm)
1270
XPB-2960LWG
10.3
BX
60
1330 DFB
LC XFP with DMI
0 to 70
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com
http: // www.optoway.com
2017/10/12 V2.0