XCL100/XCL101Series
Inductor Built-in Step-up “micro DC/DC” Converter
■GENERAL DESCRIPTION
ETR28004-006a
☆Green Operation Compatible
The XCL100/XCL101 series is a synchronous step-up micro DC/DC converter which integrates an inductor and a control IC
in one tiny package (2.5mm×2.0mm, h=1.0mm). A stable step-up power supply is configured using only two capacitors
connected externally. An internal coil simplifies the circuit and enables minimization of noise and other operational trouble
due to the circuit wiring.
The XCL100/XCL101 series can be used in applications that start from a single alkaline or nickel-metal hydride battery
because the input voltage range is 0.7V ~ 5.5V. The output voltage can be set from 1.8V to 5.0V (±2.0%) in steps of 0.1V.
PFM control enables a low quiescent current, making these products ideal for portable devices that require high efficiency.
The XCL100/XCL101 features a load disconnect function to break continuity between the input and output at shutdown
(A,B Type), and a bypass mode function to maintain continuity between the input and output (C Type).
■FEATURES
■APPLICATIONS
Input Voltage Range
:
:
Operating hold voltage 0.7V~5.5V
●Wearable devices
Start-up voltage
XCL100
0.9V~5.5V
3.0V ~ 5.0V (±2.0%)
1.8V ~ 5.0V (±2.0%)
●Mobile phones, Smart phones
●Mouses, Keyboards
●Remote controls
Output Voltage Range
XCL101
Output Current
Supply Current
Control Method
PFM Switching Current
Functions
:
:
:
:
:
80mA@VOUT=3.3V, VBAT=1.8V
6.3μA (VBAT=VOUT+0.5V)
PFM Control
●Portable information devices
●Game consoles
350mA
Load Disconnection or
Bypass Mode
CL Discharge
Output Capacitor
Operating Ambient Temperature
Package
:
:
:
:
Ceramic Capacitor Compatible
-40ºC ~ 85ºC
CL-2025, CL-2025-02
EU RoHS Compliant, Pb Free
Environmentally Friendly
■TYPICAL APPLICATION CIRCUIT
■ TYPICAL PERFORMANCE
CHARACTERISTICS
XCL101C501BR-G
7ꢀL1
100
1
VSS
NC
6
5
Lx
80
V
OUT
4.2V
2
3
VOUT
3.6V
60
C
L
VIN= 3.0V
V
CE
10μF
CE 4
VBAT
40
8ꢀL2
V
IN
20
C
IN
VOUT=5.0V
10μF
0
0.01
0.1
1
10
100
1000
Output Current:IOUT (mA)
(TOP VIEW)
“L1 and Lx”, “L2 and VBAT” is connected by PCB pattern.
1/25