XC9120/XC9121/XC912
2
Series
ETR04009-005c
Step-Up DC/DC Controller IC, MAXDUTY: 93%
☆Green Operation Compatible
■GENERAL DESCRIPTION
XC9120/XC9121/XC9122 Series are PWM, PWM/PFM auto/external switching controlled step-up DC/DC converter
controller ICs. Since maximum duty ratio is as large as 93%, the series is the best for the applications used as high step-up
ratios, such as the LCD panels and OLED. In this series, even if it is a high step-up ratio, the output voltage stabilized at high
efficiency can be obtained.
With 0.9V (±2.0%) of reference voltage supply internal, and using external resistors, RFB1 and RFB2, output voltage can be
set up freely within a range of 1.5V to 30V. For a current sense, with the use of RSENSE, ceramic capacitors can be used as
load capacitors and allows for lower output ripple and reduced PCB area requirements.
Control automatically switches from PWM to PFM during light loads with the XC9121 series and the XC9122 series can
switch the control from PWM to PFM using external signals depending on the circuit conditions.
During stand-by (when the CE pin is low), all circuits are shutdown to reduce current consumption to as low as 1.0μA or
less.
■FEATURES
■APPLICATIONS
Input Voltage Range : 0.9V ~ 6.0V
Operating Voltage Range : 1.8V ~ 6.0V
Output Voltage Range : 1.5V ~ 30V (externally set)
Reference voltage 0.9V (±2.0%)
●Power Supply for the LCDs.
●Organic electroluminescence display (OELD)
Oscillation Frequency : 100kHz (±15%)
Output Current
Control
: ≥80mA (VIN=3.6V, VOUT=15V)*
: XC9120 (PWM)
: XC9121 (PWM/PFM Automatic)
: XC9122 (PWM/PFM Externally)
: 85% (TYP.)
High Efficiency
: (VIN=3.6V, VOUT=15V, IOUT=10mA)*
: ISTB=1.0A (MAX.)
Stand-by Function
Load Capacitors
: Low ESR capacitor compatible
Maximum Duty Cycle : 93% (TYP.) for High Step-up Ratio
Packages : SOT-25, USP-6C
* When using external components showing in the circuit below.
■TYPICAL APPLICATION CIRCUIT
■TYPICAL PERFORMANCE
CHARACTERISTICS
XC9122D091 (100kHz, 15.0V)
RSENSE : 50m ohm
for Ceramic CL
SD:
XBS104S14R
L : 47uH
L=47uH(CDRH5D28),SD:XB01SB04A2
CL=40uF(Ceramic),Tr:161A11A1
100
CFB : 33pF
RFB2 :
4.2V
RFB1 :
PWM/PFM
470k ohm 30k ohm
VOUT = 15V
80
1
5
4
Nch Power
MOS FET
XP161A1355
VIN = 2.7V 4.2V
VIN=2.7V
CIN
60
40
20
0
Ceramic CL :
10uF×4
2
3.2V
3.6V
PWM
3
CE
0.1
1
10
100
Output Current: IOUT(mA)
1/16