XC6601Series
ETR0335_003
Low Voltage Input LDO Voltage Regulators
■GENERAL DESCRIPTION
The XC6601 series is a low voltage input CMOS LDO regulator which provides highly accurate (±20mV) outputs and can
supply current efficiently due to its ultra low on-resistance even at low output voltages. The series is ideally suited to the
applications which require very low dropout voltage operation and consists of a voltage reference, an error amplifier, a driver
transistor, a current limiter, a fold back circuit, a thermal shutdown (TSD) circuit, an under voltage lock out (UVLO) circuit and
a phase compensation circuit.
Output voltage is selectable in 0.05V increments within a range of 0.7V to 1.8V using laser trimming technology and
ceramic capacitors can be used for the output stabilization capacitor (CL).
The over current protection circuit (the current limiter and the fold back circuit) as well as the thermal shutdown circuit (the
TSD circuit) are built-in. These two protection circuits will operate when either the output current reaches the current limit
level or the junction temperature reaches the temperature limit level.
With the built-in UVLO function, the regulator output is forced OFF when the voltage level at the VBIAS pin or the VIN pin falls
below the UVLO voltage level.
The CE function enables the output to be turned off and the series to be put in stand-by mode resulting in greatly reduced
power consumption. At the time of entering the stand-by mode, the series enables the electric charge at the output capacitor
(CL) to be discharged via the internal auto-discharge switch which is located between the VOUT pin and the VSS pin. As a
result the VOUT pin quickly returns to the VSS level.
■FEATURES
Maximum Output Current
Dropout Voltage
■APPLICATIONS
●Mobile phones
: 400mA (Limiter 550mA TYP.)
: 38mV@IOUT=100mA (TYP.)
(at VBIAS - VOUT=2.4V)
: 2.5V ~ 6.0V
(VBIAS - VOUT≧1.2V)
: 1.0V ~ 3.0V
(VIN≦VBIAS)
: 0.7V ~ 1.8V (0.05V increments)
:±20mV
: IBIAS=25μA , IIN=1.0μA (TYP.)
: IBIAS=0.01μA , IIN=0.01μA (TYP.)
: VBIAS=2.0V, VIN=0.4V (TYP.)
:150℃/125℃ (TYP.)
: -40℃ ~ 85℃
●Cordless phones
●Wireless communication equipment
●Portable games
Bias Voltage Range
Input Voltage Range
●Cameras
Output Voltage Range
Output Voltage Accuracy
Power Consumption
●Audio visual equipment
●Portable AV equipment
●PDAs
UVLO
TSD (Detect/Release)
Operating Temperature Range
CL High Speed Auto-Discharge
Low ESR Capacitor
Packages
: Ceramic Capacitor Compatible
: USP-6C, SOT-25, SOT-89-5
■TYPICAL PEFORMANCE
■TYPICAL APPLICATION CIRCUIT
●VBIAS =3.6V , VIN =1.8V , VOUT =1.5V
CHARACTERISTICS
●Dropout Voltage vs. Output Current
XC6601B121MR
Ta=25 [℃]
300
VBIAS=3.0V
250
200
150
100
50
VBIAS=3.3V
VBIAS=3.6V
VBIAS=4.2V
VBIAS=5.0V
0
0
100
200
ꢀOutput Current: IOUT(mA)
300
400
1/32