R
Virtex-5 Family Overview
Architectural Description
Virtex-5 FPGA Array Overview
Virtex-5 devices are user-programmable gate arrays with various configurable elements and embedded cores optimized for
high-density and high-performance system designs. Virtex-5 devices implement the following functionality:
•
I/O blocks provide the interface between package pins
and the internal configurable logic. Most popular and
leading-edge I/O standards are supported by
programmable I/O blocks (IOBs). The IOBs can be
connected to very flexible ChipSync logic for enhanced
source-synchronous interfacing. Source-synchronous
optimizations include per-bit deskew (on both input and
output signals), data serializers/deserializers, clock
dividers, and dedicated I/O and local clocking
resources.
Additionally, LXT, SXT, TXT, and FXT devices also contain:
•
Integrated Endpoint blocks for PCI Express designs
providing x1, x4, or x8 PCI Express Endpoint
functionality. When used in conjunction with RocketIO
transceivers, a complete PCI Express Endpoint can be
implemented with minimal FPGA logic utilization.
•
10/100/1000 Mb/s Ethernet media-access control
blocks offer Ethernet capability.
LXT and SXT devices contain:
•
•
Configurable Logic Blocks (CLBs), the basic logic
elements for Xilinx® FPGAs, provide combinatorial and
synchronous logic as well as distributed memory and
SRL32 shift register capability. Virtex-5 FPGA CLBs
are based on real 6-input look-up table technology and
provide superior capabilities and performance
compared to previous generations of programmable
logic.
•
RocketIO GTP transceivers capable of running up to
3.75 Gb/s. Each GTP transceiver supports full-duplex,
clock-and-data recovery.
TXT and FXT devices contain:
•
GTX transceivers capable of running up to 6.5 Gb/s.
Each GTX transceiver supports full-duplex, clock-and-
data recovery.
Block RAM modules provide flexible 36 Kbit true dual-
port RAM that are cascadable to form larger memory
blocks. In addition, Virtex-5 FPGA block RAMs contain
optional programmable FIFO logic for increased device
utilization. Each block RAM can also be configured as
two independent 18 Kbit true dual-port RAM blocks,
providing memory granularity for designs needing
smaller RAM blocks.
FXT devices contain:
•
Embedded IBM PowerPC 440 RISC CPUs. Each
PowerPC 440 CPU is capable of running up to
550 MHz. Each PowerPC 440 CPU also has an APU
(Auxiliary Processor Unit) interface that supports
hardware acceleration, and an integrated cross-bar for
high data throughput.
•
•
Cascadable embedded DSP48E slices with 25 x 18
two’s complement multipliers and 48-bit
adder/subtracter/accumulator provide massively
parallel DSP algorithm support. In addition, each
DSP48E slice can be used to perform bitwise logical
functions.
The general routing matrix (GRM) provides an array of
routing switches between each internal component. Each
programmable element is tied to a switch matrix, allowing
multiple connections to the general routing matrix. The
overall programmable interconnection is hierarchical and
designed to support high-speed designs. In Virtex-5
devices, the routing connections are optimized to support
CLB interconnection in the fewest number of “hops.”
Reducing hops greatly increases post place-and-route
(PAR) design performance.
Clock Management Tile (CMT) blocks provide the most
flexible, highest-performance clocking for FPGAs. Each
CMT contains two Digital Clock Manager (DCM) blocks
(self-calibrating, fully digital), and one PLL block (self-
calibrating, analog) for clock distribution delay
compensation, clock multiplication/division, coarse-
/fine-grained clock phase shifting, and input clock jitter
filtering.
All programmable elements, including the routing
resources, are controlled by values stored in static storage
elements. These values are loaded into the FPGA during
configuration and can be reloaded to change the functions
of the programmable elements.
6
www.xilinx.com
DS100 (v5.0) February 6, 2009
Product Specification
5秒后页面跳转
STM32H743技术深度剖析与应用案例探索
LM321中文资料解析：引脚功能介绍、技术特点、技术特性分析
74HC14芯片资料介绍：性能特性分析、引脚介绍
LM1875芯片手册：功放参数分析、引脚说明、电路设计要点
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
