Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 801-1
Shielded Power Inductors
–
XAL6020
• High current and very low DCR
• Very low profile – only 2 mm tall
• Soft saturation, perfect for VRM/VRD applications
Core material Composite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other
terminations available at additional cost.
Weight 0.36 – 0.49 g
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 500/7″ reel; 1500/13″ reel Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 2.16 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Irms (A)6
±2°C rise 42°C rise
Inductance2
±±20 (ꢀµ)
SRF typ4
(Mµz)
Isat5
(A)
Part number1
typ
max
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
XAL6020-121ME_
0.12
1.60
1.85
165
45
21.0
27.0
XAL6020-141ME_ has been changed to XAL6020-121ME_. The XAL6020-141 is not available.
XAL6020-161ME_
XAL6020-271ME_
XAL6020-321ME_ has been changed to XAL6020-271ME_. The XAL6020-321 is not available.
XAL6020-451ME_
0.16
0.27
2.35
3.45
2.70
3.85
152
97
41
29.5
20.0
19.0
26.0
25.0
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other
components. Therefore temper-
ature rise should be verified
in application conditions.
0.45
4.60
5.05
73
24.5
17.0
22.0
XAL6020-601ME_
XAL6020-901ME_
XAL6020-112ME_
0.60
0.90
1.1
6.45
10.63
12.60
7.10
11.10
13.10
66
56
50
20.5
19.1
17.1
15.0
11.5
10.0
18.5
15.2
12.0
1. When ordering, please specify packaging code:
XAL62±2-11±MEC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(2000 parts per full reel).
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 801-1 Revised 01/14/18
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg