Approval sheet
REQUIREMENT
TEST AND REQUIREMENTS ( AEC Q200 )
TEST
PROCEDURE
Temperature Coefficient of Natural resistance change per change in degree centigrade.
Refer to
Resistance(T.C.R)
“QUICK REFERENCE DATA”
R2 R
106
1
(ppm/C) t1 : 20°C+5°C-1°C
Clause 4.8
R1t2 t1
R1 : Resistance at reference temperature
R2 : Resistance at test temperature
High Temperature
Exposure (Storage)
Test 1000 hrs./ @T=170℃/ Un-powered.
Measurement at 24±2 hours after test conclusion.
△R/R max. ±(1%+0.5mΩ)
no visible damage
MIL-STD-202 Method 108
Temperature cycling
no visible damage
Test 1000 cycles (-55℃ to +125℃).
JESD22 Method JA-104
R/R max. ±(0.5%+1m)
no visible damage
Measurement at 24±2 hours after test conclusion
Test 65℃/ 80~100%RH/ 10Cycles(t=24hrs/cycle).
Measurement at 24±2 hours after test conclusion.
Test 1000 hours/ @85℃/85% RH./ 10% of operation power.
Measurement at 24±2 hours after test conclusion.
Test 1000 hrs./ TA=125℃ / 35% of operating power.
Measurement at 24±2 hours after test conclusion
Inspect device construction, marking and workmanship
Moisture Resistance
MIL-STD-202 Method 106
R/R max. ±(0.5%+0.5m)
no visible damage
Bias Humidity
MIL-STD-202 Method 103
R/R max. ±(1%+0.5m)
no visible damage
Operation life
MIL-STD-202 Method 108
R/R max. ±(1%+0.5m)
no visible damage
External Visual
MIL-STD-883 Method
2009
Physical Dimensions
JESD22 Method JB-100
Mechanical Shock
The chip dimension (L, W, T, D) prescribed in the detail specification
shall be checked by Protech 2.5D.
Within the specified tolerance
Test Peak value:100g's / Wave:Hail-sine / Duration:6ms /
Velocity:12.3ft/sec.
Within product specification
tolerance and no visible
damage
MIL-STD-202 Method 213
Vibration
Test 5g’s for 20min., 12 cycles each of 3 orientations.
no visible damage
MIL-STD-202 Method 204
R/R max. ±(0.5%+0.5m)
no visible damage
Resistance to soldering
heat (R.S.H)
Solder dipping @ 270℃±5℃ for 10sec.±1sec.
R/R max. ±(0.5%+0.5m)
MIL-STD-202 Method 210
Thermal Shock
no visible damage
Test –55 to 155℃/ dwell time 15min/ Max transfer time 20sec/
300cycles.
MIL-STD-202 Method 107
R/R max. ±(0.5%+0.5m)
no visible damage
ESD
Test contact 1KV (Min)
AEC-Q200-002
R/R max. ±(1%+0.5m)
good tinning (>95% covered)
no visible damage
Solderability
J-STD-002
a) Bake the sample for 155℃ dwell time 4hrs/ solder dipping 235℃/
5sec.
b) Steam the sample dwell time 8 hour/ solder dipping 215℃/ 5sec.
c) Steam the sample dwell time 8 hour/ solder dipping 260℃/ 7sec.
Bending 2mm
Board Flex
no visible damage
AEC-Q200-005
R/R max. ±(0.5%+1m)
Terminal Strength
AEC-Q200-006
Force: 1.8kg for 60sec.
No cracking or no part being
sheared off from its pad.
Short time overload
(S.T.O.L) Clause 4.13
5×Rated power for 5 seconds.
no visible damage
R/R max.±1%
R/R max.±1%
Anti-Sulfur
EIA-977(Test B)
Sulfur 750 hours, 105±2°C
Page 6 of 7
ASC_WW12K_J_AUTO_V04
Sep - 2023
5秒后页面跳转
MAX7219驱动8段数码管详解及数据手册关键信息
ATMEGA328P技术资料深入分析
AT24C02芯片手册管脚信息、参数分析、应用领域详解
AT24C256芯片手册参数分析、引脚说明、读写程序示例
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
