W9145 SERIES
15-MEMORY TONE/PULSE DIALER WITH LOCK
AND HANDFREE FUNCTIONS
GENERAL DESCRIPTION
The W9145 series are Si-gate CMOS ICs that provide the necessary signals for either pulse or tone
dialing. The W9145 series feature a key tone function, handfree dialing, a lock function, thirteen 16-
digit automatic dialing memories, and two by 32-digit for redial and save memory.
FEATURES
· DTMF/Pulse switchable dialer
· Two by 32 digits for redial and save memory
· Three by 16 digits for one-touch direct repertory
· Ten by 16 digits for two-touch indirect repertory
· Unlimited dialing length (redial inhibited if dialing length exceeds 32 digits in normal dialing)
· Auto Pause Access for PBX and toll service operations (3.1 seconds per pause)
· Easy operation with redial, store, auto and pause keypads
· Key tone output for recognition of valid keypad entry
· Call disconnect (CD) key for line break operation
· Mute key for speech mute
· Flash time: 98 mS, 305 mS or 600 mS
· Minimum tone output duration: 93 mS
· Minimum intertone pause: 93 mS
· 0 or 9 dialing inhibition pin for PABX system or long distance dialing lock out
· Automatic switching from pulse mode to tone mode by */T key operation
· Break/make ratio pin selectable
· Uses Form A keyboard or standard 5 ´ 5 matrix keyboard
· Uses inexpensive 3.579545 MHz television color-burst crystal
· Internally generated power-on reset
· Packaged in 22/24-pin DIP
· The different dialers in the W9145 series are shown in the following table:
TYPE NO.
W9145
PULSE (ppS)
FLASH
B/M
Pin
Pin
Pin
Pin
HANDFREE
LOCK
No
10
10
10
10
98/305/600
98/305/600
98/305/600
98/305/600
No
Yes
No
W9145A
W9145L
No
Yes
Yes
W9145AL
Yes
PIN CONFIGURATIONS
Publication Release Date: August 1996
Revision A4
- 1 -