W91350N SERIES
13-MEMORY TONE/PULSE DIALER WITH
HANDFREE AND HOLD FUNCTIONS
GENERAL DESCRIPTION
The W91350N series are tone/pluse switchable telephone dialers with thirteen memories, hold
function, and a handfree dialing control circuit. Fabricated using CMOS technology, the W91350N series
offer good performance in low-voltage and low-power applications.
FEATURES
· DTMF/pulse switchable dialer
· Two by 32-digit redial memory and save memory
· Three by 16-digit one-touch direct repertory memory
· Ten by 16-digit two-touch direct repertory memory
· Cascaded dialing allowed, with unlimited dialing length
· Pulse-to-tone (*/T) keypad for long distance call operation
· Uses 5 ´ 5 keyboard
· Easy operation with redial, flash, pause, and */T keypads
· Pause, P® T (pulse-to-tone) can be stored as a digit in memory
· Dialing rate (10 ppS or 20 ppS) is selectable by bonding option
· On-hook debounce time: 150 msec.
· Minimum tone output duration: 93 msec. (W91354AN: 87 mS)
· Minimum intertone pause: 93 msec. (W91354AN: 87 mS)
· Flash break time (73, 100, 300, 600 msec) selectable by keypad; pause time is 1.0 sec.
· Make/break ratio (40:60 or 33.3:66.7) selectable by MODE pin
· On-chip power-on reset
· Uses 3.579545 MHz crystal or ceramic resonator
· Packaged in 18 or 20-pin plastic DIP
The different dialers in the W91350N series are shown in the following table:
·
TYPE NO.
REPLACEMENT
TYPE NO.
PULSE
(ppS)
FLASH
(mS)
M/B
HANDFREE
DIALING
PACKAGE
(PINS)
W91350N
W91350
W91351
W91352
W91350A
W91351A
W91352A
New type
10
600/300/73/100
Pin
-
18
W91352N
20
10
600/300/73/100
600/300/73/100
Pin
Pin
-
18
20
W91350AN
Yes
W91352AN
W91354AN
20
10
600/300/73/100
600/300/73/100
Pin
Pin
Yes
Yes
20
20
Note: The W91354AN is for use in France only. The pause time is not added in pulse-to-tone function mode.
Publication Release Date: May 1997
Revision A2
- 1 -