VCXO
Page 1 of 3
VSY SERIES: VCXO OSCILLATOR, HCMOS, +2.5 VDC, 7x5mm Package
DESCRIPTION: A crystal controlled, high frequency, highly stable, voltage controlled oscillator, adhering to HCMOS
Standards. The output can be Tri-stated to facilitate testing or combined multiple clocks. The device is contained in a sub-
miniature, very low profile, leadless ceramic SMD package with 6 gold contact pads. This miniature oscillator is ideal for
today's automated assembly environments.
APPLICATIONS AND FEATURES:
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
Common Frequencies: 16.384 MHz; 19.44 MHz; 27 MHz; 38.88 MHz; 51.84 MHz; 77.76MHz; 123.6MHz
+2.5 VDC HCMOS
Frequency Range from 16 to 130 MHz
Miniature Ceramic SMD Package Available on Tape and Reel
Lead Free and ROHS Compliant
ꢂ
ABSOLUTE MAXIMUM RATINGS:
PARAMETER
SYMBOL
VALUE
UNIT
Operating temperature range Ta
-40…+85
-55…+90
°C
Storage temperature range
Supply voltage range
T(stg)
°C
Vcc
Vc
-0.5…+4.6
VDC
VDC
VDC
Maximum Control Voltage
Maximum Output Voltage
-0.5…Vcc+0.5
-0.5…Vcc+0.5
Vo
ꢂ
ELECTRICAL PARAMETERS:
PARAMETER
SYMBOL
TEST CONDITIONS*1
VALUE
16.000 ~ 130.000
UNIT
Nominal Frequency
Supply Voltage
fo
MHz
VDC
Vcc
+2.5 ±10%
Fo=27MHz
Fo=35MHz
Fo=78MHz
Fo=126MHz
4.0 MAX, 2.8 TYP
6.0 MAX, 4.2 TYP
9.0 MAX, 7.2 TYP
12 MAX 10 TYP
Nominal Vcc,
Nominal Load,
+25 ±3°C
Supply Current
Is
mA
ppm
pF
Power supply rejection
Output Logic Type
Load
PsRR
Frequency Change with Vcc varied ±10%
±1 MAX
HCMOS
15
Connected from output to ground
Voh
Vol
0.9•Vcc MIN
0.1•Vcc MAX
VDC
VDC
Output Voltage Levels
Duty Cycle
DC
Measured at 50% of Vcc
40/60 to 60/40 or 45/55 to 55/45
%
Measured at 20/80% and Fo<27MHz
3.0 MAX 2.4 TYP
2.5 MAX 2 TYP
Rise / Fall Time*2
tr / tf
ns
80/20% Vcc Levels
Fo>35MHz
Jitter
J
RMS Period Jitter 1sigma 1000 samples*4
2.5 TYP
ps
ps
Phase Jitter
Jp
RMS Phase Jitter integrated from 12KHz to 20MHz*6 0.6 TYP
∆f =100Hz Offset
∆f =1KHz Offset
∆f =10KHz Offset
∆f =100KHz Offset
∆f =1MHz Offset
-80
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
-110
-130
-138
-145
Typical measured at
100MHz*5
Phase Noise
£ (∆f)
Control Voltage Range
Control Voltage sensitivity
Absolute Pull Range
Settability
VC
Positive slope; 10% linearity MAX
0 to +2.5
VDC
ppm/V
ppm
VDC
MΩ
100 TYP
∆f/fc(∆Vc)
APR
Vfo
See Part Numbering *3
+1.25 ± 0.25
2 MIN
Minimum guaranteed freq. pull over ∆f/fc
Input Impedance
Zin
DC to 1KHz
-3 dB
Modulation Bandwidth
ESD protection
BW
45 MIN
kHz
Human Body Model
2000 MIN
VDC
Pin 2
Output Enabled
Output Disabled
En
Dis
High Voltage or No Connect
Ground
0.7•Vcc MIN
0.3•Vcc MAX
VDC
VDC
RALTRON ELECTRONICS CORP. ꢀ10651 N.W . 19t h St ꢀMiami, Florida 33172 ꢀU.S.A.
phone: (305) 593-6033 ꢀfax: (305) 594-3973 ꢀe-mail: sales@raltron.com ꢀWEB: http://www.raltron.com