NON-ISOLATED DC/DC CONVERTERS
4.5 Vdc - 13.8 Vdc Input
0.59 Vdc - 5.1 Vdc / 3 A Output
VRAE-03E1A1
RoHS Compliant
Rev.B
Non-Isolated
High Efficiency
Fixed Frequency
Low Cost
Under-Voltage Lockout
Wide Trim
OCP/SCP
Remote On/Off
Wide Input
Description
The Bel VRAE-03E1A1 is part of the non-isolated dc/dc converter Power Module series. The modules use a SIP
package. These converters are available in a range of output voltages from 0.59 Vdc to 5.1 Vdc over a wide
range of input voltage (VIN = 4.5 Vdc - 13.8 Vdc).The efficiency is typically 91% at 3.3 Vout (Vin=12 Vdc) at full
load.
Part Selection
Output
Max. Output
Current
Max. Output
Power
Typical
Efficiency
Model Number
Input Voltage
Voltage
0.59 V - 5.1 V
4.5 V - 13.8 V
3 A
15 W
91%
VRAE-03E1A1
Notes: 1. All part numbers above indicate RoHS 6. Change the second letter "R" to "7" for RoHS 5 part numbers.
2. Add “G” suffix at the end of the model numbers listed above to indicate “Tray Packaging”.
Absolute Maximum Ratings
Parameter
Min
Typ
Max
Notes
Input Supply Voltage
-0.3 V
-
15 V
Ambient Temperature
Storage Temperature
-
-
0 C
70 C
-55 C
125 C
Note: All specifications are typical at 25 C unless otherwise stated.
Input Specifications
Parameter
Min
Typ
Max
Notes
Operating Input Voltage
Vo,set≤3.63 V
Vo,set﹥3.63 V
Input Current (full load)
4.5 V
7.0 V
-
-
13.8 V
13.8 V
-
-
-
-
TBD
An input line fuse must always be used.
Input Current (no load)
40 mA
10 mA
100 mA
25 mA
Remote Off Input Current
With simulated source impedance of
1000 nH, 5 Hz to 20 MHz. Use a 1000
uF/25 V AL-Cap with ESR=0.03 ohm
max and 2*100 Uf/25V Tan-Cap with
ESR=0.013 ohm max at 100
Input Reflected Ripple Current
(pk-pk)
-
-
30 mA
10 mA
50 mA
Input Reflected Ripple Current
(rms)
20 mA
kHz@25°C.
I2t Inrush Current Transient
Turn on Voltage Threshold
Turn off Voltage Threshold
-
-
1 A2s
4.45 V
4.3 V
4.15 V
3.7 V
4.3 V
4.1 V
A 30.1K resistor is connected from
Enable to Vin.
Note: All specifications are typical at 25 C unless otherwise stated.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com