VLCONNECTOR
6.2mm pitch/Disconnectable Crimp style connectors
(Combined use for both wire-to-board and wire-to-wire connections)
Specifications –––––––––––––––––––
• Current rating: 20 A AC, DC (Refer to the following table.)
0
• Voltage rating: 600 V AC, DC
L
J S T
a
• Temperature range: -25˚C to +90˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/ 7 mΩ max.
After environmental tests/ 10 mΩ max.
• Insulation resistance: 1,000 MΩ min.
• Withstanding voltage: 2,000 VAC/minute
• Applicable wire: AWG #22 to #12
• Applicable PC board thickness: 1.6 mm
* In using the products, refer to "Handling Precaution for Terminal
and Connector" described on our website (Technical documents
of Product information page).
* Contact JST for details.
* RoHS2 compliance
Note: The current rating differs depending on the number of circuits and the wire
size used in each connector. The table below lists the current rating as a
function of the number of circuits and the wire size.
Current unit: A
Wire size (AWG)
#16 #18
No. of
circuits
2
3
4
6
8
12
#12
20
17
16
15
14
13
#14
15
14
13
12
11
10
#20
6
6
6
5
#22
4
4
4
3
10
9
8
8
7
7
6
6
This VL connector is 6.2 mm pitch wire-to-
wire and wire-to-board connector, designed
for large current. Secondary retainer, which
prevents from insufficient insertion of
contact and coming off contact, may use
and large current circuit can be connected
certainly and safety.
9
8
7
7
5
4
3
3
Note: Do not branch in parallel current which exceeds the rated current (e.g. more than
17A in the case of 3 circuits with AWG #12). If branched in parallel, current
imbalance or other problems may develop. If it is absolutely necessary to branch
such a large current in parallel, design the circuits without causing any imbalance
and provide an extra margin for each circuit.
• Housing lances
• Retainer
Standards ––––––––––––––––––––––
0 Recognized E60389
•
Suited for large current
Certified LR20812
R9351103
1
2
• Compatible for both wire-to-wire and wire-to-
board connections
PC board layout and Assembly layout
(19.3)
(13.2)
<4, 6, 8, 12 circuits>
<2, 3, 4 (Single-row) circuits>
A±0.1
3.6min
A±0.1
6.2±0.05
3.6 min
4 circuits
(Single-row):φ1.8 ±0.05
2, 3 circuits:φ2.1±0.05
6.2±0.05
φ2.1±0.05
Inner-housing lock
Inner-housing lock
(15.6)
(21.7)
Outer-housing lock
Outer-housing lock
Note: 1. The above figure is the figure viewed from soldering side.
2. Tolerances are non-cumulative: ±0.05 mm for all centers.
3. Hole dimensions differ according to the type of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details.
1