VJ X7R Dielectric
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Commercial Applications
FEATURES
• General purpose dielectric
• Excellent aging characteristics
• Ideal for decoupling and filtering
RoHS
COMPLIANT
• Ideal for surge suppression and high voltage applications
• Wide range of case sizes, voltage ratings and capacitance
values
• Protective surface coating of high voltage capacitors
maybe required to prevent surface arcing
• Surface mount, precious metal technology, wet built
process
ELECTRICAL SPECIFICATIONS
Note: Electrical characteristics at + 25 °C unless otherwise specified
Insulation Resistance (IR):
At + 25 °C and rated voltage 100 000 MΩ minimum or
1000 ΩF, whichever is less
Operating Temperature: - 55 °C to + 125 °C
Capacitance Range: 100 pF to 1.8 µF
Voltage Rating: 10 Vdc to 1000 Vdc
At + 125 °C and rated voltage 10 000 MΩ minimum or
100 ΩF, whichever is less
Temperature Coefficient of Capacitance (TCC):
X7R: 15 % from - 55 °C to + 125 °C, with 0 Vdc applied
X5R: 15 % from - 55 °C to + 85 °C, with 0 Vdc applied (4)
Dielectric Withstanding Voltage (DWV):
This is the maximum voltage the capacitors are tested for a
1 to 5 second period and the charge/discharge current does
not exceed 50 mA
≤ 200 Vdc: DWV at 250 % of rated voltage
500 Vdc: DWV at 200 % of rated voltage
630/1000 Vdc: DWV at 150 % of rated voltage
Dissipation Factor (DF):
≤ 25 V ratings: 3.5 % maximum at 1.0 Vrms and 1 kHz
> 25 V ratings: 2.5 % maximum at 1.0 Vrms and 1 kHz
Aging Rate: 1 % maximum per decade
ORDERING INFORMATION
VJ0805 (3)
Y
102
K
X
A
A
T
### (2)
CASE
CODE
DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC VOLTAGE
MARKING
PACKAGING
PROCESS
CODE
NOMINAL CODE TOLERANCE
RATING (1)
0402
0603
0805
1206
1210
1808
1812
1825
2220
2225
3640
Y = X7R
Expressed in
J = 5 %
K = 10 %
M = 20 %
X = Ni barrier
100 % tin plated
F = AgPd
Q = 10 V
J = 16 V
X = 25 V
A = 50 V
B = 100 V
C = 200 V
E = 500 V
L = 630 V
G = 1000 V
A = Unmarked
M = Marked
Note: Marking is
only available for
0805 and 1206
G = X5R (4) picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier.
Examples:
T = 7" reel/plastic tape
C = 7" reel/paper tape
R = 11 1/4" reel/plastic tape
P = 11 1/4" reel/paper tape
O = 7" reel/flamed paper tape
I = 11 1/4"/13"reel/flamed paper
tape
102 = 1000 pF
Note: “I” and “O” is used for
“F” termination paper taped
Notes:
(1) DC voltage rating should not be exceeded in application
(2) Process Code may be added with up to three digits, used to control non-standard products and/or special requirements
(3) Case size designator may be replaced by four digit drawing number used to control non-standard products and/or special requirements
(4)
Selected values for X5R, see selection chart
Document Number: 45127
Revision: 10-Apr-08
For technical questions, contact: mlcc@vishay.com
www.vishay.com
43
5秒后页面跳转
NTC热敏电阻与PTC热敏电阻的应用原理及应用范围
GTO与普通晶闸管相比为什么可以自关断？为什么普通晶闸管不能呢？从GTO原理、应用范围带你了解原因及推荐型号
LF353数据手册解读：特性、应用、封装、引脚说明、电气参数及替换型号推荐
A4950资料手册解读：特性、应用、封装、引脚功能、电气参数及代换型号
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
