375Vin / 5Vout / 100Watts
45
• DC input range: 250 - 425V
• Input surge withstand: 500V for 100ms
• DC output: 5V
DC-DC Converter Module
*
Model Number V375C5C100A
Features
• Programmable output: 10 to 110%
• Regulation: ±0.2% no load to full load
• Efficiency: 80%
• Maximum operating temperature:
100°C at full load
• Power density: 61W/cubic inch
• Height above board: 0.43 in. (10,9 mm)
• Parallelable, with N+M fault tolerance
• Low noise ZCS/ZVS architecture
Shown actual size:
2.28 x 1.45 x 0.5 in
57,9 x 36,8 x 12,7 mm
Typical Applications: distributed power;
off-line systems using power PFC front-ends;
electric vehicles
Absolute Maximum Ratings
Product Overview
This DC-DC converter module uses
2nd Generation power processing, control
and packaging technologies to provide the
performance, flexibility and cost effectiveness
expected of a mature power component.
For example, a plated-cavity core transformer
couples widely separated primary and
secondary windings, resulting in low in-to-
out parasitic capacitance and noise.
High frequency ZCS/ZVS switching,
advanced power semiconductor packaging
and thermal management provide high
power density with low temperature
gradients. Extensive use of silicon
integration results in 1/3 the part count
of a 1st Generation converter.
Parameter
Rating
-0.5 to +425.0
500
Unit
Vdc
Notes
+In to –In voltage
+In to –In voltage
Vdc
<100ms
PC to –In voltage
-0.5 to +7.0
-0.5 to +7.0
-0.5 to +7.0
-0.5 to +1.5
3000
Vdc
PR to –In voltage
Vdc
+Out to –Out voltage
SC to –Out voltage
Vdc
Vdc
Isolation voltage (in to out)
Isolation voltage (in to base)
Isolation voltage (out to base)
Storage temperature (C–Grade)
Vrms
Vrms
Vrms
°C
1550
500
See part numbering chart on this
page for other product grades.
-40 to +125
Operating temperature (C–Grade) -20 to +100
°C
Baseplate
Pin soldering temperature
Pin soldering temperature
Mounting torque
500 (260)
750 (390)
5 (0.57)
°F (°C)
°F (°C)
in-lbs (N-m)
<5 sec; wave solder
<7 sec; hand solder
6 each, # 4-40 or M3
*
Part Numbering
V 375 C 12 C 150 A
Output
Pin
Style
Output
Power
Input Voltage
Voltage
24=24Vin
48=48Vin
Base-
plate
Product Grade Temperatures (°C)
300=300Vin
375=375Vin
Thermal Resistance and Capacity
Grade
Storage
Operating
20 to +100
40 to +100
40 to +100
55 to +100
C
T
H
M
=
=
=
=
-
-
-
-
40 to +125
40 to +125
55 to +125
65 to +125
-
-
-
-
A = Maxi
B = Mini
C = Micro
Parameter
Min
Typ
0.24
0.21
10.9
2.8
Max
Unit
°C/Watt
Baseplate to sink; flat, greased surface
Baseplate to sink; thermal pad (P/N 20265)
Baseplate to ambient
For pin styles see page 6. Slotted baseplate
(style 1) requires no designator. For
threaded baseplate add a “2” to the end of
the part number. For thru-hole, add a “3”.
See page 7 for dimensions.
°C/Watt
°C/Watt
Baseplate to ambient; 1000 LFM
Thermal capacity
°C/Watt
48
Watt-sec/°C
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
V375C5C100A DC-DC Converter
Rev. 5.2
Page 1 of 8
Set your site on VICOR at www.vicorpower.com