Varistors Datasheet
AUMOV® Series
Radial Leaded Varistors
Tape and Reel Specifications (continued)
Model Size
Symbol
Description
5mm
7mm
10mm
14mm
20mm
(11Vac to 95Vac
≥115Vac
Voltage
voltage)
25.4 +/- 1.0
12.7 +/- 0.2
8.85 +/- 0.7
12.7 +/- 0.7
7.5 +/- 1.0
2.0 Max
P
P0
P1
P2
F
Pitch of Component
Feed Hole Pitch
Feed Hole Center to Pitch
Hole Center to Component Center
Lead to Lead Distance
Component Alignment
12.7 +/- 1.0
12.7 +/- 0.2
3.85 +/- 0.7
6.35 +/- 1.0
5.0 +/- 1.0
2.0 Max
12.7 +/- 1.0
12.7 +/- 0.2
3.85 +/- 0.7
6.35 +/- 1.0
5.0 +/-1.0
25.4 +/- 1.0
12.7 +/- 0.2
8.85 +/- 0.7
12.7 +/- 0.7
7.5 +/- 1.0
25.4 +/- 1.0
12.7 +/- 0.2
8.85 +/- 0.7
12.7 +/- 0.7
7.5 +/- 1.0
25.4 +/- 1.0
12.7 +/- 0.2
7.70 +/- 0.7
12.7 +/- 0.7
10 +/- 1.0
2.0 Max
18.0 + 1.0 /
-0.5
h
2.0 Max
2.0 Max
2.0 Max
W
Tape Width
18.0 +1.0 / -0.5 18.0 +1.0 / -0.5 18.0 +1.0 / -0.5 18.0 +1.0 / -0.5 18.0 +1.0 / -0.5
W0 Hold DownTape Width
W1 Hole Position
12.0 +/- 0.3
9.0 +0.75 /
-0.50
12.0 +/- 0.3
9.0 +0.75 /
-0.50
12.0 +/- 0.3
9.0 +0.75 /
-0.50
12.0 +/- 0.3
9.0 +0.75 /
-0.50
12.0 +/- 0.3
9.0 +0.75 /
-0.50
12.0 +/- 0.3
9.0 +0.75 /
-0.50
W2 Hold DownTape Position
0.5 Max
0.5 Max
0.5 Max
0.5 Max
0.5 Max
0.5 Max
Height fromTape Center to
Component Base
H
18.0 +2.0 / -0.0 18.0 +2.0 / -0.0 18.0 +2.0 / -0.0 18.0 +2.0 / -0.0 18.0 +2.0 / -0.0 18.0 +2.0 / -0.0
H0
H1
D0
t
U
p
Seating Plane Height
Component Height
Feed Hole Diameter
TotalTapeThickness
Undercrimp Width
16.0 +/- 0.5
29.0 Max
4.0 +/- 0.2
0.7 +/- 0.2
8.0 Max
16.0 +/- 0.5
32.0 Max
4.0 +/- 0.2
0.7 +/- 0.2
8.0 Max
16.0 +/- 0.5
36.0 Max
4.0 +/- 0.2
0.7 +/- 0.2
8.0 Max
16.0 +/- 0.5
40.0 Max
4.0 +/- 0.2
0.7 +/- 0.2
8.0 Max
16.0 +/- 0.5
46.5 Max
4.0 +/- 0.2
0.7 +/- 0.2
8.0 Max
16.0 +/- 0.5
46.5 Max
4.0 +/- 0.2
0.7 +/- 0.2
8.0 Max
Component Alignment
3° Max
3º Max
3° Max
3° Max
3° Max
3° Max
Notes:
1. Radial devices on tape are supplied with crimped leads, straight leads, or under-crimped leads
2. Leads are offset by product dimension e1
3. Conforms to ANSI and EIA specifications
4. Can be supplied to IEC Publication 286-2
5. 10mm parts are available on tape and reel up to 510 VAC only
6. 14mm and 20mm parts are available on tape and reel up to 550 VAC only
Part Numbering System
14 AUTO L1 B XXXXX
P
V 05
Other
Littelfuse Varistor
Non-Standard Options
Disc Size
05, 07, 10, 14 or 20 mm
Packaging
Blank or B: Bulk Pack
T: Tape and Reel
A: Ammo Pack
Coating
E: Epoxy
P: Phenolic
H: Silicone
Available for 10, 14, or 20mm
Lead Formation
Blank or L1: Straight
L2: Outer Crimp
L3: In-Line
VM(AC)RMS
14V to 625V
AUMOV® Series
L4: Trim/Outer Crimp (Bulk pack only)
L5: Inner Crimp
AEC-Q200 Table 10 Compliant for Phenolic and
Silicone coating
Note: for Vm(AC) 100V to 625V parts, the L1, L2, L3, L4, and L5
should be replaced by 1,2,3,4, and 5 respectively
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are
not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.
© 2021 Littelfuse, Inc.
Specifications are subject to change without notice.
12
Revised: GD. 07/16/21