Datasheet > UWT1A331MCL

UWT1A331MCL

更新时间： 2024-11-20 03:22:39

品牌	Logo	应用领域
尼吉康 - NICHICON		电容器铝电解电容器
页数	文件大小	规格书
2页	108K
描述
ALUMINUM ELECTROLYTIC CAPACITORS

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

UWT1A331MCL 数据手册

ALUMINUM ELECTROLYTIC CAPACITORS

Chip Type, Wide Temperature Range

WT series

Chip type operating over wide temperature range of to –55 ~ +105°C

Designed for surface mounting on high density PC board.

Applicable to automatic mounting machine using carrier tape.

Adapted to the RoHS directive (2002/95/EC).

High

Temperature

Reflow

Low

impeadance

Smaller

Long Life

Specifications

Item

Performance Characteristics

Category Temperature Range

Rated Voltage Range

Rated Capacitance Range

Capacitance Tolerance

Leakage Current

–55 ~ +105°C

4 ~ 50V

0.1 ~ 1500µF

±20% at 120Hz, 20°C

After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater.

Measurement frequency : 120Hz, Temperature : 20°C

Rated voltage (V)

6.3

tan

tan δ (MAX.)

0.40

0.30

0.24

0.20

0.16

0.14

Measurement frequency : 120Hz

Rated voltage (V)

6.3

Stability at Low Temperature

Z–25°C / Z+20°C

Z–40°C / Z+20°C

Impedance ratio

ZT / Z20 (MAX.)

Capacitance

change

Within ±25% of initial value for capacitors of φ3mm unit, and 16V or less.

Within ±20% of initial value for capacitors of 25V or more.

After 1000 hours' application of rated voltage

at 105°C, capacitors meet the characteristic

requirements listed at right.

Endurance

Shelf Life

tan δ

200% or less of initial specified value

Leakage current Initial specified value or less

After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4

clause 4.1 at 20°C, they will meet the specified value for characteristics listed above.

endurance

The capacitors shall be kept on the hot plate maintained at 250°C

for 30 seconds. After removing from the hot plate and restored

at room temperature, they meet the characteristic requirements

listed at right.

Capacitance change

tan δ

Within ±10% of initial value

Initial specified value or less

Resistance to soldering

heat

Leakage current

Marking

Black print on the case top.

Type numbering system (Example : 16V 10 F)

Chip Type

Dimension table in next page.

CAT.8100V

中文翻译

下载PDF

与UWT1A331MCL相关器件

型号	品牌	获取价格	描述	数据表
UWT1A331MNL	NICHICON	获取价格	ALUMINUM ELECTROLYTIC CAPACITORS
UWT1A331MNL1GB	NICHICON	获取价格	Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF
UWT1A331MNL1GS	NICHICON	获取价格	Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF
UWT1A331MNL1GSL	NICHICON	获取价格	Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF
UWT1A331MNR1GB	NICHICON	获取价格	Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF
UWT1A331MNR1GS	NICHICON	获取价格	Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF
UWT1A331MNR1GSL	NICHICON	获取价格	Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF
UWT1A331NL1GS	NICHICON	获取价格	Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF
UWT1A331NR1GS	NICHICON	获取价格	Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 330uF
UWT1A470CR1GB	NICHICON	获取价格	Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 10V, 20% +Tol, 20% -Tol, 47uF,

与UWT1A331MCL相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

25
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

17
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

49
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

46

产品中心

服务支持

精选活动

关于我们

帮助中心

UWT1A331MCL

UWT1A331MCL 数据手册

与UWT1A331MCL相关器件

与UWT1A331MCL相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

UWT1A331MCL

UWT1A331MCL 数据手册

与UWT1A331MCL相关器件

与UWT1A331MCL相关文章

您还可以找

您在本页遇到什么问题？