Data Sheet, Rev. 4
June 2001
USS-820D
USB Device Controller
Features
New Features After Revision B
I Full compliance with the Universal Serial Bus
Specification Revision 1.1.
I New, centralized FIFO status bits and interrupt out-
put pin reduce firmware load.
I Backward compatible with USS-820B and
I New, additional nonisochronous transmit mode
USS-820C revisions.
allows NAK response to cause interrupt.
I Self-powered or bus-powered USB device. Meets
USB power specifications for bus-powered
devices.
I Isochronous behavior enhancements simplify firm-
ware control.
I Additional FIFO sizes for nonisochronous end-
I Full-speed USB device (12 Mbits/s).
points.
I USB device controller with protocol control and
I USB reset can be programmed to clear device
address.
administration for up to 16 USB endpoints.
I Supports control, interrupt, bulk, and isochronous
transfers for all 16 endpoints.
I Programmable endpoint types and FIFO sizes and
internal 1120-byte logical (2240-byte physical for
dual-packet mode) shared FIFO storage allow a
wide variety of configurations.
I USB reset output status pin.
I Firmware ability to wake up and reset a suspended
device.
I Lower power.
I 5 V supply no longer required for 5 V tolerant oper-
ation.
I Dual-packet mode of FIFOs reduces latency.
I Supports USB remote wake-up feature.
Applications
I On-chip crystal oscillator allows external 12 MHz
crystal or 3 V/5 V clock source.
I Suitable for peripherals with embedded micropro-
cessors.
I Glueless interface to microprocessor buses.
I Support of multifunction USB implementations,
such as printer/scanner and integrated multimedia
applications.
I On-chip analog PLL creates 48 MHz clock from
internal 12 MHz clock.
I Integrated USB transceivers.
I 5 V tolerant I/O buffers allow operation in 3 V or 5
V system environments for 0 °C to 70 °C tempera-
ture range.
I 5 V tolerant I/O buffers allow operation in 3 V only
system environments for –20 °C to +85 °C temper-
ature range.
I Suitable for a broad range of device class periph-
erals in the USB standard.
I Implemented in Agere Systems Inc. 0.25 µm, 3 V
standard-cell library.
I 44-pin MQFP (USS-820D).
I 48-pin TQFP (USS-820TD).
I Evaluation kit available.
Note: Advisories are issued as needed to update product information. When using this data sheet for design purposes, please contact
your Agere Systems Account Manager to obtain the latest advisory on this product.