DC/DC Converter
URE_LP-10WR3 & URF_LP-10WR3 Series
10W,Ultra wide input isolated & regulated dual/single
Output,DC-DC converter
FEATURES
Wide range of input voltage (4:1)
Efficiency up to 87%
No-load power consumption as low as 0.12W
Isolation voltage :3K VDC
Input under-voltage protection, output
over-voltage protection, short circuit protection,
output over-current protection
Operating temperature range: -40℃ to +85℃
Meet CISPR22/EN55022 CLASS A
A2S (wring mounting) and A4S (TS35 rail mounting)
products featuring anti-reverse connection for
input
Meet UL60950/ EN60950/ IEC60950 Certified
International standard pin-out
CBPatent Protection RoHS
URE_LP-10WR3 & URF_LP-10WR3 series are isolated 10W DC-DC products with 4:1 input voltage. They feature efficiency up to 87%, 3000VDC
isolation, operating temperature of -40℃~+85℃, Input under-voltage protection, output short circuit protection, over-voltage protection,
over-current protection and EMI meets CISPR22/EN55022 CLASS A, which make them widely applied in industrial control, electric power,
instruments and communication fields. And extension package A2S and A4S also enable them with reverse voltage protection.
Selection Guide
Input Voltage (VDC)
Output
Efficiency
Max.
①
③
Part No.
(%,Typ.)
Certification
Capacitive
Load(µF)
Nominal
(Range)
Output
Voltage (VDC)
Output Current (mA)
(Max./Min.)
②
Max.
@ Full Load
80/82
84/86
85/87
77/79
80/82
83/85
84/86
85/87
85/87
80/82
84/86
85/87
77/79
80/82
84/86
85/87
85/87
URE2405LP-10WR3
URE2412LP-10WR3
URE2415LP-10WR3
URF2403LP-10WR3
URF2405LP-10WR3
URF2409LP-10WR3
URF2412LP-10WR3
URF2415LP-10WR3
URF2424LP-10WR3
URE4805LP-10WR3
URE4812LP-10WR3
URE4815LP-10WR3
URF4803LP-10WR3
URF4805LP-10WR3
URF4812LP-10WR3
URF4815LP-10WR3
URF4824LP-10WR3
±5
±12
±15
3.3
5
±1000/0
±416/0
±333/0
2400/0
2000/0
1111/0
833/0
1000
330
--
220
5400
5400
680
24
40
(9-36)
9
UL/CE/CB
12
15
24
±5
±12
±15
3.3
5
470
667/0
330
416/0
100
±1000/0
±416/0
±333/0
2400/0
2000/0
833/0
1000
330
--
220
5400
5400
470
48
80
(18-75)
UL/CE/CB
12
15
24
667/0
330
416/0
100
Notes:
①Part No. with suffix of “A2S” means chassis mounting and suffix of “A4S” means DIN-Rail mounting (e.g. URF2405LP-10WR3A2S means chassis mounting;
URF2405LP-10WR3A4S means DIN-Rail mounting);
②Absolute maximum rating without damage on the converter, but it isn't recommended;
③Efficiency is measured In nominal input voltage and rated output load;A2S (wiring) and A4S (rail) Model due to input reverse polarity protection, minimum
efficiency greater than Min.-2 is qualified;
④The capacitive loads of positive and negative outputs are identical.
2015.11.16-A/3
Page 1 of 6
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation