DATA SHEET
MOS INTEGRATED CIRCUIT
µPD750104,750106,750108,750104(A),750106(A),750108(A)
4 BIT SINGLE-CHIP MICROCONTROLLER
The µPD750108 is one of the 75XL series 4-bit single-chip microcontrollers, which provide data processing
capability equal to that of an 8-bit microcontroller.
The µPD750108 is produced by replacing the main system clock oscillator of the µPD750008 with an RC oscillator,
enabling operation at a relatively low voltage of 1.8 V. In addition, it is best suited to applications using batteries.
The µPD750108(A) has a higher reliability than the µPD750108.
A built-in one-time PROM product, µPD75P0116, is also available. It is suitable for small-scale production and
evaluation of application systems.
The following user’s manual describes the details of the functions of the µPD750108. Be sure to read it
before designing application systems.
µPD750108 User’s Manual: U11330E
FEATURES
• Built-in RC oscillator
•
Function for specifying the instruction execution time
(useful for saving power)
• Enables the immediate start of processing after the
release of standby mode
4 µs, 8 µs, 16 µs, 64 µs (when operating at 1.0 MHz)
2 µs, 4 µs, 8 µs, 32 µs (when operating at 2.0 MHz)
122 µs (when operating at 32.768 kHz)
• Capable of low-voltage operation: VDD = 1.8 to 5.5 V
• Internal memory
• Enhanced timer function (4 channels)
• Can be easily substituted for the µPD750008 because
this product succeeds to the functions and instructions
of the µPD750008.
Program memory (ROM)
: 4,096 × 8 bits (µPD750104 and µPD750104(A))
: 6,144 × 8 bits (µPD750106 and µPD750106(A))
: 8,192 × 8 bits (µPD750108 and µPD750108(A))
Data memory (RAM)
: 512 × 4 bits
APPLICATIONS
• µPD750104, µPD750106, and µPD750108
Cameras, meters, and pagers
• µPD750104(A), µPD750106(A), and µPD750108(A)
Electrical equipment for automobiles
The µPD750104, µPD750106, µPD750108, µPD750104(A), µPD750106(A), and µPD750108(A) differ only in
quality grade. In this manual, the µPD750108 is described unless otherwise specified. Users of other than the
µPD750108 should read µPD750108 as referring to the pertinent product.
When the description differs among µPD750104, µPD750106, and µPD750108, they also refer to the pertinent
(A) products.
µPD750104 → µPD750104(A), µPD750106 → µPD750106(A), µPD750108 → µPD750108(A)
The information in this document is subject to change without notice.
Document No. U12301EJ1V0DS00 (1st edition)
Date Published July 1997 J
Printed in Japan
1990
1997
©