1A, 2.25MHz, Synchronous Step-Down DC-DC Converter
UM3510S SOT23-6
UM3510DA DFN6 2.0×2.0
General Description
The UM3510 is a high efficiency pulse-width-modulated (PWM) synchronous step-down DC-DC
converter with an input voltage range of 2.5V to 6.0V. It provides up to 1000mA output current
from a single Li-ion cell. The UM3510 operates at 2.25MHz fixed switching frequency and enters
Power Save Mode to maintain high efficiency at light load condition.
For low noise applications, the device can be forced into fixed frequency PWM mode by pulling
the MODE pin high.
The UM3510 enters shutdown mode and consumes less than 1μA when EN pin is pulled low.
Other features include lower internal reference voltage with 2% accuracy, over temperature
protection and over current protection.
The UM3510 is available in SOT23-6 and 2mm×2mm 6-pin DFN packages.
Applications
Features
Cellular and Smart Phones
Microprocessors and DSP Core
Supplies
Wireless and DSL Modems
PDAs, GPS
WLAN
High Efficiency: Up to 95%
2.25MHz Constant Switching Frequency
1000mA Output Current
Integrated Main Switch and Synchronous
Rectifier. No Schottky Diode Required.
2.5V to 6.0V Input Voltage Range
Low Quiescent Current: 56µA
Thermal Fault Protection
Portable Instruments
<1µA Shutdown Current
Typical Application Circuit
L1
VOUT 1.8V,
1000mA
2.2µH
VIN 2.5V to 6V
VIN
EN
SW
C1
R1
360kΩ
CIN
10µF
22pF
COUT
10µF
UM3510
GND
FB
R2
180kΩ
MODE
Pin Configurations
Top View
6
5
4
3
1
2
3
6
5
4
FB
MODE
SW
EN
UCB
VIN
2
1
GND
M: Month Code
UM3510S
SOT23-6
________________________________________________________________________
http://www.union-ic.com Rev.01 Jan.2016 1/13