Bidirectional voltage level translator for open-drain and
push-pull applications
UM2002S8 SOP8
UM2002U8 TSSOP8
General Description
The UM2002 is a bidirectional voltage level translator operational from 1.0V to 3.6V (Vref(A)) and
1.8V to 5.5V (Vref(B)), which allows bidirectional voltage translations between 1.0V and 5V
without the need for a direction pin in open-drain or push-pull applications. Bit widths ranging
from 1-bit or 2-bit are offered for level translation application with transmission speeds < 33 MHz
for an open-drain system with a 50 pF capacitance and a pull-up of 197Ω.
The translators provide excellent ESD protection to lower voltage devices, and at the same time
protect less ESD-resistant devices.
Applications
Features
SPI, MICROWIRE and I2C Level
Translation
Low-Voltage ASIC Level Translation
Smart Card Readers
Cell-phone Cradles
Portable POS Systems
Portable Communication Devices
Low-Cost Serial Interfaces
Cell-Phones
Provides bidirectional voltage translation
with no direction pin
Less than 1.5 ns maximum propagation
delay
Allows voltage level translation between:
1). 1.0V Vref(A) and 1.8V, 2.5V, 3.3V or 5V
Vref(B)
2). 1.2V Vref(A) and 1.8V, 2.5V, 3.3V or 5V
Vref(B)
GPS
3). 1.8V Vref(A) and 3.3V or 5V Vref(B)
4). 2.0V Vref(A) and 5V Vref(B)
5). 3.3V Vref(A) and 5V Vref(B)
Low 3.5Ω ON-state connection between
input and output ports provides less signal
distortion
Telecommunications Equipment
Consumer Electronics
Household Appliances
5V tolerant I/O ports to support
mixed-mode signal operation
High-impedance An and Bn pins for
EN = LOW
Lock-up free operation
Flow through pinout for ease of
printed-circuit board trace routing
ESD protection exceeds:
4kV HBM per JESD22-A114
200V MM per JESD22-A115
1000V CDM per JESD22-C101
Packages offered: SOP8, TSSOP8
________________________________________________________________________
http://www.union-ic.com Rev.04 Feb.2014 1/12