RESISTORSꢀCAPACITORSꢀCOILSꢀDELAY LINES
HIGH VOLTAGE AND HIGH VALUE RESISTORS
Term.W is
RoHS
compliant
& 260°C
compatible
UHV SERIES
RoHS
ꢀ Resistance values up to 200TΩ (2x1014Ω), tolerances to 1%!
ꢀ Voltage rating to 14KV. Pulse voltage to 50KV avail.
ꢀ Low noise & voltage coefficient
World’s highest resistance range!
RCD Type UHV resistors are suited for all high value applications
from general purpose bleed chains to highest reliability X-ray
systems and TWT amplifiers. RCD’s exclusive complex oxide
film features state-of-the-art performance and extended life
stability. The unique molecular structure of the resistive element
offers exceptional insensitivity to high voltage and thermal shock.
The protective insulation provides a high dielectric voltage, and
insulation resistance. Series UHV3 is hermetically sealed in a
glass or ceramic case, minimizing the effects of moisture or
contamination.
ꢀ Industry’s best TCR, as low as ±25ppm/°C
SPECIAL MODIFICATIONS
ꢀ Screw terminations available
ꢀ Resistance tolerances to ±0.2%, matching to 0.1%
ꢀ Voltage or resistance ratios up to 1000 : 1±1.0%
ꢀ Increased power, voltage, and operating frequency levels
D
.041 [1.04] Max.
↓
↑
←
L
→|
↓
↑
|←1.25 [32] Min.*→|
DERATING
100
*UHV3=1 [25.4] Min.
80
UHV1 & 2
60
40
RCD Type
UHV1
L (Max.)
D
1.102 [28.0]
1.875 [47.6]
2.00 [50.8]
.315 ±.040 [8.0±1]
.315 ±.040 [8.0±1]
.264 [6.7] Max.
UHV3
20
UHV2
0
20
40
60
80
100
120
140
UHV3
AMBIENT TEMPERATURE (°C)
RESISTANCE RANGE**
RCD
TYPE
Wattage
@ 25°C
Working
Voltage*
Avail. TCR
(ppm/°C)
1%
2%
5%, 10%
1K to 100M
100Ω to 100M
5Ω to 1G
1.1G to 10G
2M to 100G
1K to 100M
100Ω to 100M
100K to 1G
1.1G to 50G
2M to 150G
100M to 1G
1G to 1T
25
50
100
250
-2000
25
50
100
250
-2000
-2000
-2500
-3500
1K to 100M
100Ω to 100M
10Ω to 1G
1.1G to 10G
2M to 10G
1K to 100M
100Ω to 100M
100K to 1G
1.1G to 50G
2M to 50G
100M to 1G
1G to 1T
1K to 100M
100Ω to 100M
5Ω to 1G
UHV1
1.0W
4000V
1.1G to 10G
2M to 50G
1K to 100M
100Ω to 100M
100K to 1G
1.1G to 50G
2M to 100G
100M to 1G
1G to 1T
UHV2
UHV3
2.0W
1.0W
14,000V
1000V
1T to 5T
1T to 10T
1T to 200T
* Maximum DC or ACRMS working voltage determined by E = PR below the critical resistance value. Voltage rating is doubled in warm oil. Increased voltage ratings available. **increased range available.
PERFORMANCE CHARACTERISTICS 1
APPLICATION NOTES
1) Due to possible surface condensation, high voltages should not
be applied in conditions of high humidity. The end caps of UHV1&2
are uninsulated and need to be mounted an adequate distance
from conductors to ensure adequate isolation voltage.
UHV1&2 = -55°C to +150°C
UHV3 = -40°C to +100°C
1 - 20ppm typ. UHV1 & UHV2
Temperature Range
Voltage Coefficient 2
10 to 80ppm UHV3
2) Type UHV3 is coated with silicone to reduce condensation on the
glass case and minimize shunt resistance. The coating must not be
damaged or subjected to solvents; handle by terminations. UHV3
>100G are supplied with a guard band to minimize leakage current.
3) Resistance measurements on values over 1 Meg are made at 100V.
4) Resistors are available with screw terminations & tapped end caps to
provide virtually any voltage or resistance value by combining in series.
Insulation Resistance (500V)
Load Life (1000 hours, typ.)
Shelf Life (12 months, typ.)
Noise (per freq. decade, typ.)
1013Ω
0.5%
0.5%
2.0µV/ V
1 Characteristics are typical for resistance range up to 1GΩ , consult factory concerning higher values
2 Measured between 100V and 500V on values above 100M (tighter VC’s available)
RESISTANCE CODE
P/N DESIGNATION:
UHV3
- 1T50 - F B 101 W
Scientific
Notation
1x103Ω
Resis. Code
1% 2%-10%
RCD Type
Option Codes assigned by RCD (leave blank if std)
Resistance Value
1KΩ
1MΩ
10MΩ
100MΩ
1GΩ
10GΩ
100GΩ
1TΩ
10TΩ
100TΩ
1001
1004
1005
1006
1G00
10G0
100G
1T00
10T0
100T
102
105
106
107
1G0
10G
100G
1T0
10T
100T
Resis. Code 1% Tol: 3 signif. figures & multiplier (1001=1KΩ,
1004= 1MΩ, 1006=100MΩ, 1G00= 1GΩ, 1T50 =1.5T, etc.)
Resis. Code 2% - 10%: 2 signif. figures & multiplier (105= 1MΩ,
107=100M, 1G5= 1.5GΩ, 15T=15TΩ). Refer to Resis. Code table
1x106Ω
1x107Ω
1x108Ω
1x109Ω
Tolerance Code: K=10%, J=5%, G=2%, F=1%
Packaging: B =Bulk, T= Tape & Reel
1x1010Ω
1x1011Ω
1x1012Ω
1x1013Ω
1x1014Ω
Temp. Coefficient (PPM/°C): 25=25ppm, 50=50ppm, 101=100ppm,
102=1000ppm, 202=2000ppm, 252=2500ppm, 352=3500ppm
Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable)
-
-
-
-
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603 669 0054 Fax: 603 669 5455 Email:sales@rcdcomponents.com
FA061B Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
72
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
