UFTC Tip Cartridges for Metcal UltraFineTM Hand-piece
NEW
UFTC-7CN01
UltraFine™ Tip Cartridge, Conical
0.13mm x 5.1mm (0.005" x 0.2")
UFTC-7CH08
UltraFine™ Tip Cartridge, Chisel
0.8mm x 5.1mm (0.03" x 0.2")
UFTC-7CN02
UltraFine™ Tip Cartridge, Conical
0.2mm x 5mm (0.01" x 0.2")
UFTC-7CH12
UltraFine™ Tip Cartridge, Chisel
1.2mm x 5mm (0.05" x 0.2")
UFTC-7CN04
UltraFine™ Tip Cartridge, Conical
0.4mm x 5mm (0.02" x 0.2")
UFTC-7CHL06
UltraFine™ Tip Cartridge, Chisel, Long
0.6mm x 9mm (0.024" x 0.35")
UFTC-7CNL04
UFTC-7CHL08
UltraFine™ Tip Cartridge, Chisel, Long
0.8mm x 9mm (0.03" x 0.35")
9
UltraFine™ Tip Cartridge, Conical,
Long 0.4mm x 9mm (0.02" x 0.31")
UFTC-7CNB02
UFTC-7DRH408
UltraFine™ Tip Cartridge, Hoof, Micro
0.8mm x 5.1mm (0.03" x 0.2")
UltraFine™ Tip Cartridge, Conical, Bent
0.2mm x 5.5mm (0.01" x 0.22")
UFTC-7CNB04
UFTC-7DRH412
UltraFine™ Tip Cartridge, Conical, Bent
0.4mm x 5.5mm (0.02" x 0.22")
UltraFine™ Tip Cartridge, Hoof, Micro
1.2mm x 5.1mm (0.048" x 0.2")
UFTC-7CH06
UltraFine™ Tip Cartridge, Chisel
0.6mm x 5.1mm (0.024" x 0.2")
7 = 700 Series for most standard applications. UFTC Tip Cartridges are only available in 700 Series
STDC Desolder Cartridges for Desoldering Hand-piece
The Metcal MX-DS1 Desoldering Hand-piece provides exceptional ability for safely desoldering through-hole components.
The high-mass STDC cartridges store a high volume of heat while maintaining a non-damaging constant temperature.
Coupled with the MX-5000 power supply, heat is rapidly replenished, dynamically responding to the load conditions.
ø A mm (")
ø B mm (")
STDC-102!
STDC-103!
STDC-104!
STDC-105!
STDC-106!
STDC-107!
STDC-703L!!
STDC-704L!!
STDC-705L!!
Cartridge, Desolder
0.64mm (0.025")
0.76mm (0.076")
1.02mm (0.04")
1.27mm (0.05")
1.52mm (0.06")
2.41mm (0.095")
0.76mm (0.03")
1.02mm (0.04")
1.27mm (0.05")
1.40mm (.055")
1.68mm (.066")
1.78mm (.070")
2.03mm (.080")
2.29mm (.090")
3.18mm (.125")
1.68mm (.066")
1.79mm (.070")
2.03mm (.080")
Standard
Cartridge, Desolder
Cartridge, Desolder
Long Reach
Cartridge, Desolder
Cartridge, Desolder
0.400"
Cartridge, Desolder
Cartridge, Desolder Long Reach
Cartridge, Desolder Long Reach
Cartridge, Desolder Long Reach
! 1 = 700 Series for most standard applications. 8 = 800 Series for ceramic and high thermal demand applications. 0 = 600 Series also available for temperature sensitive
applications. To order these series, replace 1 with 8 or 0.
!!
7 = 700 Series for most standard applications. 8 = 800 Series for ceramic and high thermal demand applications. To order this series, replace 7 with 8.
Download the Surface Mount Removal Techniques using MX-5000 Soldering and Rework System technical note from
www.metcal.com
10