UEI Series
www.murata-ps.com
50-60W Isolated Wide-Range DC/DC Converters
Featuring a full 50-60 Watt output in 2.9 square inches of board area,
the UEI series isolated DC/DC converter family offers efficient
regulated DC power for printed circuit board mounting.
PRODUCT OVERVIEW
Typical unit
Wide range 4:1 inputs on the 1.50" x 1.90" x 0.38"
converter are either 9 to 36 Volts DC (Q12 models)
or 18 to 75 Volts DC (Q48 models), ideal for battery-
powered and telecom equipment. Fixed output
voltages from 3.3 VDC to 15 VDC are regulated to
within 0.05ꢀ and may be trimmed within 10ꢀ
of nominal output. Applications include small instru-
ments, computer-based systems, data communica-
tions equipment, remote sensor systems, vehicle
and portable electronics.
FPGA’s. No minimum load is required. For systems
requiring controlled startup/shutdown, an external
switch, transistor or digital logic may be used to acti-
vate the remote On/Off control. Remote Sense inputs
compensate for resistive line drops at high currents.
FEATURES
nꢀ
Small footprint DC/DC converter, ideal for high
current applications
nꢀ
Industry standard 1.50˝x1.90˝ x0.38˝ open frame
package and pinout
A wealth of self-protection features avoid both
converter and external circuit problems. These
include input undervoltage lockout, input overvolt-
age and overtemperature shutdown. The outputs
current limit using the “hiccup” autorestart technique
and the outputs may be short-circuited indefinitely.
Additional features include output overvoltage and
reverse conduction elimination. The synchronous
rectifier forward topology offers high efficiency for
minimal heat buildup and “no fan” operation.
nꢀ
Wide range input voltages 9-36 and 18-75Vdc
nꢀ
Assembly and attachment for RoHS standards
nꢀ
Isolation up to 2250 VDC (basic)
The UEI 50-60W Series includes full magnetic
and optical isolation up to 2250 Volts DC (basic
insulation). For connection to digital systems, the
outputs offer fast settling to current step loads and
tolerance of higher capacitive loads. Excellent ripple
and noise specifications assure compatibility to
circuits using CPU’s, ASIC’s, programmable logic and
nꢀ
Up to 50-60W total output power with
overtemperature shutdown
nꢀ
High efficiency synchronous rectifier forward
topology
nꢀ
Stable no-load operation with no required
external components
nꢀ
–40 to +85°C temperature range with derating
nꢀ
Certified to UL60950-1, CSA-C22.2 No. 234,
EN60950-1, 2nd Edition safety approvals
nꢀ
Extensive self-protection shut down features
nꢀ
RoHS-6 compliant
SIMPLIFIED SCHEMATIC
+VOUT
+VIN
GATE
DRIVE
–VIN
–VOUT
ISOLATION
BARRIER
+SENSE
On/Off
Control
Control
TRIM
–SENSE
OPTO
ISOLATION
Reference, trim &
Error Amplifier
Typical topology is shown.
For full details go to
www.murata-ps.com/rohs
Figure 1. Simplified block diagram
www.murata-ps.com/support
MDC_UEI Series 50-60W.C12 Page 1 of 14