2549
PROTECTED
QUAD POWER DRIVER
Providing improved output current limiting, the UDK/UDN/
UDQ2549B and UDK/UDN/UDQ2549EB quad power drivers combine
AND logic gates and high-current bipolar outputs with complete output
protection. Each of the four outputs will sink 600 mA in the on state.
The outputs have a minimum breakdown voltage (load dump) of 60 V
and a sustaining voltage of 40 V. The inputs are compatible with TTL
and 5 V CMOS logic systems.
UDx2549B
1
2
3
4
16
IN
IN
OUT
4
3
4
15
14
K
ENABLE
GROUND
GROUND
OUT
3
Over-current protection for each channel has been designed into
these devices and is activated at approximately 1 A. It protects each
output from short circuits with supply voltages up to 25 V. When an
output current trip point is reached, that output stage is driven linearly
resulting in a reduced output current level. If an over-current or short
circuit condition continues, the thermal limiting circuits will first sense
the rise in junction temperature and then the rise in chip temperature,
further decreasing the output current. Under worst-case conditions,
the six devices in this family will tolerate short-circuits on all outputs,
simultaneously.
13
12
11
10
9
GROUND
5
6
GROUND
OUT
2
V
CC
7
8
K
IN
IN
2
1
OUT
1
Dwg. PP-017-1
These devices can be used to drive various loads including
incandescent lamps (without warming or limiting resistors) or inductive
loads such as relays, solenoids, or dc stepping motors.
The suffix ‘B’ devices are 16-pin power DIPs while the suffix ‘EB’
devices are 28-lead power PLCCs for surface-mount applications.
Both packages are of batwing construction to provide for maximum
package power dissipation.
ABSOLUTE MAXIMUM RATINGS
at TA = 25°C
Output Voltage, VOUT . . . . . . . . . . . . . 60 V
FEATURES
Over-Current Protected Output Voltage,
V
OUT . . . . . . . . . . . . . . . . . . . . . . . 25 V
ꢀ 600 mA Output Current per Channel
ꢀ Independent Over-Current Protection for Each Driver
ꢀ Thermal Protection for Device and Each Driver
ꢀ Low Output-Saturation Voltage
Output Current, IOUT . . . . . . . . . . . . . 1.0 A*
Supply Voltage, VCC . . . . . . . . . . . . . . 7.0 V
Input Voltage, VIN or VEN . . . . . . . . . . 7.0 V
Package Power Dissipation,
ꢀ Integral Output Flyback Diodes
PD . . . . . . . . . . . . . . . . . . . . See Graph
Operating Temperature Range, TA
ꢀ TTL and 5 V CMOS Compatible Inputs
ꢀ Pin-Compatible With UDN2543B/EB
Prefix ‘UDK’ . . . . . . . -40°C to +125°C
Prefix ‘UDN’ . . . . . . . . -20°C to +85°C
Prefix ‘UDQ’ . . . . . . . . -40°C to +85°C
Storage Temperature Range,
TS . . . . . . . . . . . . . . . -55°C to +150°C
*Outputs are peak current limited at approximately
1.0 A per driver. See Circuit Description and
Applications for further information.
Always order by complete part number: a prefix to indicate operating
temperature range + the basic four-digit part number + a suffix to
indicate package style, e.g., UDK2549EB .