Datasheet > UD200

UD200

更新时间： 2024-11-23 03:24:27

品牌	Logo	应用领域
其他 - ETC		/
页数	文件大小	规格书
2页	118K
描述
Heavy duty polyurethane concrete flooring system

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

UD200 数据手册

UCRETE^UD200

Heavy duty polyurethane concrete flooring system

Surface Resistivity (BS2050)

Density (BS6319:Part 5)

Water Adsorption (CP.BM 2/67/2)

Surface Spread of Flame

(BS476:Part 7)

: 3x10^-4ohms

: 2090 kg/m³

: 0 ml

DESCRIPTION

Ucrete UD200 is a single layer, seamless, solvent-free,

polyurethane flooring system. It has a textured matt

: Class 2

finish possessing

wide spectrum of chemical

resistance; withstands abrasive wear; has high impact

resistance and withstands direct steam impact.

PROPERTIES

RECOMMENDED FOR

Colours

: Yellow ~ RAL 1004

Cream ~ RAL 1014

Orange ~ RAL 2010

Red ~ RAL 3001

Green ~ RAL 6010

Ucrete UD200 is recommended for conditions requiring

the maximum of chemical resistance, health and safety

and where thermal situations arise, from cool rooms to

hot environments.

Grey

~ RAL 7037

Specific applications include:

Thickness

: 5 to 9 mm.

•

meat, fish and poultry processing

food and beverage production

dairies, cheese and milk products

cold rooms, chillers and freezers

pharmaceutical production

chemical plants

Service temperatures

at 9 mm

: 120°C max. & -40°C

: 70°C max. & -20°C

at 6 mm

APPLICATION

Surface Preparation

Concrete shall be clean, structurally sound and free

from foreign materials, contaminants, oily products and

other debris. Concrete surfaces shall be ‘visibly dry’ with

no standing water. The minimum tensile (pull-off)

strength shall be 1.5N/mm² and concrete shall have

cured for at least 5 days. Concrete substrates shall

incorporate a continuous waterproofing membrane.

FEATURES AND BENEFITS

Expert

Installed only by trained and approved

application

specialist contractors.

Fast

Can be applied to 6-day-old concrete

Concrete design shall allow provisions for movement

joints, as required. In addition, provision shall be made

for induced joints to allow any shrinkage of the concrete

to occur along defined planes.

All laitance shall be removed. All imperfections such as

holes and cracks shall be repaired and levelled with the

mean level of the surface. For repairing surface

uneveness, EMACO^®concrete repair systems shall be

used.

application/r or

day old polymer screeds.

apid access

Short curing time and 8 hours access

to foot traffic; 20 hours for vehicles.

Hygienic/

safe

Slip resistant, non-tainting, non-

dusting, monolithic (minimum joints),

easy to maintain, microbiologically

inert.

Durable/long

life

Wide chemical resistance, wear and

impact resistant, resists temperatures

The whole surface shall be enclosed or impact shot

blasted, surface planed, ground or high-pressure water

jetted. All high spots shall be removed. Surfaces shall

be rendered ‘visibly dry’ by heat or mechanical means.

from -40°C to 120°C at

9 mm

thickness; 25 years of international

use.

Remove all loose material and dust by vacuum or

Prepacked

Preweighed/ prepacked for immediate

use; batch to-batch colour matched

for consistency.

mechanical means.

Priming

Ucrete UD200 shall be applied to a cured scratch coat

of Ucrete MF of 1 mm nominal thickness.

TYPICAL PERFORMANCE DATA

(After 28 days @ 20°C)

Placing

Compressive Strength (BS6319:Part 2) : 58 N/mm²

Ucrete UD200 shall be mixed and applied only by

specialist flooring contractors who have been trained in

the correct application procedures.

Flexural Strength (ISO178)

: 14 N/mm²

Dynamic E-Modulus (ASTM C597-83) : 19500 N/mm²

Tensile Strength (ISO R527)

Concrete Adhesion (BS6319:Part 2)

Abrasion Resistance (Taber H22)

Coeff. Thermal Expansion

(ASTM C531)

: 6 N/mm²

CURING

: concrete fails

: 1390mg

At 30°C, foot traffic access in 8 hours; vehicular traffic in

16 hours. At 20°C, foot traffic access in 12 hours;

vehicular traffic in 24 hours. Full cure at 28 days.

: 2.4x10^-5°C^-1

Thermal Conductivity (BS874)

: 1.1W/m°C

Page 1 of 2

中文翻译

下载PDF

与UD200相关器件

型号	品牌	获取价格	描述	数据表
UD2006FR	SANYO	获取价格	Low VF Switching Diode
UD2006LS-SB	SANYO	获取价格	Low VF Switching Diode
UD2-1.5NEN-L	KEMET	获取价格	Power/Signal Relay
UD2-1.5NRN-L	RENESAS	获取价格	Electromechanical Relay, DPDT, Latched, 140mW (Coil), 1A (Contact), 220VDC (Contact), Rand
UD2-1.5NRN-R6	RENESAS	获取价格	Electromechanical Relay, DPDT, Latched, 140mW (Coil), 1A (Contact), 220VDC (Contact), Rand
UD2-1.5NR-R	RENESAS	获取价格	Electromechanical Relay, DPDT, Latched, 140mW (Coil), 1A (Contact), 220VDC (Contact), Rand
UD2-1.5NUN	KEMET	获取价格	Power/Signal Relay
UD2-1.5NUN-L6	RENESAS	获取价格	Electromechanical Relay, DPDT, Latched, 140mW (Coil), 1A (Contact), 220VDC (Contact), Rand
UD2-1.5NUN-R6	RENESAS	获取价格	Electromechanical Relay, DPDT, Latched, 140mW (Coil), 1A (Contact), 220VDC (Contact), Rand
UD2-1.5SNR-L6	RENESAS	获取价格	Electromechanical Relay, DPDT, Latched, 100mW (Coil), 1A (Contact), 220VDC (Contact), Rand

与UD200相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

36
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

28
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

56
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

53

产品中心

服务支持

精选活动

关于我们

帮助中心

UD200

UD200 数据手册

与UD200相关器件

与UD200相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

UD200

UD200 数据手册

与UD200相关器件

与UD200相关文章

您还可以找

您在本页遇到什么问题？