UCC3810-DIE
www.ti.com
SLUSBM2 –JUNE 2013
DUAL CHANNEL SYNCHRONIZED CURRENT-MODE PWM
Check for Samples: UCC3810-DIE
1
FEATURES
DESCRIPTION
The UCC3810-DIE is
•
•
•
•
•
•
Single Oscillator Synchronizes Two PWMs
Startup Supply Current
a
high-speed BiCMOS
controller integrating two synchronized pulse width
modulators for use in off-line and dc-to-dc power
supplies. The UCC3810-DIE provides perfect
synchronization between two PWMs by using the
same oscillator. The oscillator’s sawtooth waveform
can be used for slope compensation if required.
Operating Supply Current
Internal Soft-Start
Full-Cycle Fault Restart
Internal Leading-Edge Blanking of the Current
Sense Signal
Using
a
toggle flip-flop to alternate between
•
•
75-ns Typical Response from Current Sense to
Output
modulators, the UCC3810-DIE ensures that one
PWM does not slave, interfere, or otherwise affect the
other PWM. This toggle flip- flop also ensures that
each PWM is limited to 50% maximum duty cycle,
insuring adequate off-time to reset magnetic
elements.
1.5% Tolerance Voltage Reference
ORDERING INFORMATION(1)
PACKAGE
DESIGNATOR
PRODUCT
PACKAGE
ORDERABLE PART NUMBER
PACKAGE QUANTITY
UCC3810TD1
UCC3810TD2
100
10
UCC3810
TD
Bare die in waffle pack(2)
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Processing is per the Texas Instruments commercial production baseline and is in compliance with the Texas Instruments Quality
Control System in effect at the time of manufacture. Electrical screening consists of DC parametric and functional testing at room
temperature only. Unless otherwise specified by Texas Instruments AC performance and performance over temperature is not
warranted. Visual Inspection is performed in accordance with MIL-STD-883 Test Method 2010 Condition B at 75X minimum.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2013, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.