Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
UCC28630
UCC28631
UCC28632, UCC28633
SLUSBW3C –MARCH 2014–REVISED MARCH 2015
UCC28630, UCC28631, UCC28632 and UCC28633, High-Power Flyback Controller
with Primary-Side Regulation and Peak-Power Mode
1 Features
3 Description
The UCC2863x targets high-power, primary-side
regulated flyback converters. The powerful gate driver
and ability to operate in both CCM and DCM make
the device suitable for applications with a wide power
range. The peak power mode allows transient peak
power delivery up to 200% of nominal rating, with
only a 25% peak current increase, maximizing
transformer utilization.
1
•
High-Power, Primary-Side Regulation for Output
Voltage and Current, No Opto-Coupler Required
•
Continuous Conduction Mode (CCM) and
Discontinuous Conduction Mode (DCM) Operation
•
•
Built-In 700-V Start-Up Current Source
Active X-Capacitor Discharge Function
(UCC28630 and UCC28633)
The transformer bias winding is used to sense output
voltage for regulation, and for low-loss input voltage
sensing. Advanced sampling and processing
techniques allow CCM operation, and deliver
excellent output voltage regulation performance for
opto-coupler-less designs at power levels of 100 W
and above.
•
Adjustable Constant-Current (CC) Mode Limiting
(except for UCC28630)
•
•
•
High Gate Drive Current 1-A Source and 2-A Sink
Low Power Modes for <30-mW System Standby
Best-In-Class Light Load (10%) Efficiency >85%
for 65-W Nominal Power Design
•
•
•
Peak-Power Mode for Transient Overload
Shutdown Pin Interface for External NTC
A high-voltage current source enables fast and
efficient start-up. Advanced light-load modes are
deployed (including switching frequency modulation
and device sleep modes) to reduce both controller
and system power consumption at no load and light
load. These modes enable potential system designs
to meet 30-mW no-load power for power designs up
to 30 W nominal, 60 W peak.
Protections: Overvoltage, Overcurrent, Over-
Temperature, Overload Timer (UCC28630), AC
Line UV, Brownout and Pin Protections
•
Frequency Dither to Ease EMI Compliance
(except the UCC28632)
The device has been designed for ease-of-use and
incorporates many features to enable a wide range of
designs. Extensive protection features are included to
simplify system design.
2 Applications
•
•
•
AC-DC Adapters for Notebook, Game Consoles,
Printers
Open Frame SMPS for Industrial, Printer, White
Goods, LCD Monitors
Device Information
PART NUMBER
UCC28630
UCC28631
UCC28632
UCC28633
PACKAGE
BODY SIZE
Energy Efficient AC-DC Supplies for Nominal
Power 10-W to 65-W, (with up to 200% transient
peak power)
SOIC (7)
4.90 mm x 3.90 mm
4 Simplified Schematic
VOUT
Typical Application Measured Regulation
21
VAC
EMC
Filter
20.5
20
19.5
19
+5% Limit
1% Typical
115V/60 Hz
18.5
1
2
3
4
VSENSE
SD
HV
8
230V/50 Hz
UCC28630
±5% Limit
to
18
CS
VDD
6
5
0
10
20
30
40
50
60
70
GND
DRV
Output Power (W)
C001
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.