UCC27527
UCC27528
www.ti.com
SLUSBD0B –DECEMBER 2012–REVISED JANUARY 2013
Dual 5-A High-Speed Low-Side Gate Driver Based on CMOS Input Threshold Logic
Check for Samples: UCC27527, UCC27528
1
FEATURES
APPLICATIONS
•
•
•
•
Industry-Standard Pin Out
•
•
•
•
Switch-Mode Power Supplies
DC-to-DC Converters
Two Independent Gate-Drive Channels
5-A Peak Source and Sink Drive Current
Motor Control, Solar Power
CMOS Input Logic Threshold
(function of supply voltage on VDD pins)
Gate Drive for Emerging Wide Band Gap
Power Devices such as GaN
•
Hysteretic Logic Thresholds for High Noise
Immunity
DESCRIPTION
The UCC2752x family of devices are dual-channel,
high-speed, low-side gate driver devices capable of
effectively driving MOSFET and IGBT power
switches. Using a design that inherently minimizes
shoot-through current, UCC2752x is capable of
delivering high-peak current pulses of up to 5-A
source and 5-A sink into capacitive loads along with
rail-to-rail drive capability and extremely small
propagation delay typically 17 ns. In addition, the
drivers feature matched internal propagation delays
between the two channels which are very well suited
for applications requiring dual-gate drives with critical
timing, such as synchronous rectifiers. The input pin
thresholds are based on CMOS logic, which is a
function of the VDD supply voltage. Wide hysteresis
between the high and low thresholds offers excellent
noise immunity. The Enable pins are based on TTL
and CMOS compatible logic, independent of VDD
supply voltage.
•
•
Independent Enable Function for Each Output
Inputs and Enable Pin Voltage Levels Not
Restricted by VDD Pin Bias Supply Voltage
•
•
4.5-V to 18-V Single Supply Range
Outputs Held Low During VDD UVLO, (ensures
glitch-free operation at power-up and power-
down)
•
•
Fast Propagation Delays (17-ns typical)
Fast Rise and Fall Times (7-ns and 6-ns
typical)
•
1-ns Typical Delay Matching Between 2-
Channels
•
•
Outputs Held in LOW When Inputs Floating
SOIC-8, and 3-mm x 3-mm WSON-8 Package
Options
•
•
Operating Temperature Range of -40°C to
140°C
-5-V Negative Voltage Handling Capability on
Input Pins
Product Matrix
Dual Input Configuration
Dual Non-Inverting Inputs
UCC27527
UCC27528
INA-
1
8
INA+
ENA
1
8
7
6
5
ENB
OUTA
VDD
INA
GND
INB
2
3
4
INB-
GND
2
3
4
7
6
5
INB+
OUTA
VDD
OUTB
OUTB
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012–2013, Texas Instruments Incorporated