5秒后页面跳转
UC2886DG4 PDF预览

UC2886DG4

更新时间: 2024-11-21 12:16:55
品牌 Logo 应用领域
德州仪器 - TI 稳压器开关式稳压器或控制器电源电路开关式控制器光电二极管
页数 文件大小 规格书
9页 206K
描述
Average Current Mode PWM Controller IC

UC2886DG4 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Obsolete零件包装代码:SOIC
包装说明:GREEN, SOIC-16针数:16
Reach Compliance Code:unknownECCN代码:EAR99
HTS代码:8542.39.00.01风险等级:5.82
Is Samacsys:N模拟集成电路 - 其他类型:SWITCHING CONTROLLER
控制模式:CURRENT-MODE控制技术:PULSE WIDTH MODULATION
最大输入电压:20 V最小输入电压:10.3 V
标称输入电压:12 VJESD-30 代码:R-PDSO-G16
JESD-609代码:e4长度:9.9 mm
湿度敏感等级:2功能数量:1
端子数量:16最高工作温度:85 °C
最低工作温度:-25 °C最大输出电流:1.5 A
封装主体材料:PLASTIC/EPOXY封装代码:SOP
封装等效代码:SOP16,.25封装形状:RECTANGULAR
封装形式:SMALL OUTLINE峰值回流温度(摄氏度):260
认证状态:Not Qualified座面最大高度:1.75 mm
子类别:Switching Regulator or Controllers表面贴装:YES
切换器配置:SINGLE最大切换频率:115 kHz
技术:BIPOLAR温度等级:OTHER
端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)端子形式:GULL WING
端子节距:1.27 mm端子位置:DUAL
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:3.9 mm
Base Number Matches:1

UC2886DG4 数据手册

 浏览型号UC2886DG4的Datasheet PDF文件第2页浏览型号UC2886DG4的Datasheet PDF文件第3页浏览型号UC2886DG4的Datasheet PDF文件第4页浏览型号UC2886DG4的Datasheet PDF文件第5页浏览型号UC2886DG4的Datasheet PDF文件第6页浏览型号UC2886DG4的Datasheet PDF文件第7页 
application  
INFO  
UC2886  
UC3886  
available  
Average Current Mode PWM Controller IC  
FEATURES  
DESCRIPTION  
10.3V - 20V Operating Range  
The UC3886 family of PWM controller ICs is designed for DC-to-DC con-  
verters with average current mode control. It is designed for use in con-  
junction with the UC3910 4-bit DAC and Voltage Monitor. The UC3886  
drives an external N-channel MOSFET and can be used to power the In-  
tel Pentium® Pro and other high-end microprocessors.  
Low Offset Voltage Amplifier  
High Bandwidth Current and Voltage  
Amplifiers  
The UC3886 in conjunction with the UC3910 converts 5VDC to an adjust-  
able output ranging from 2.0V to 3.5V in 100mV steps with 35mV DC sys-  
tem accuracy.  
Low Offset Current Sense Amplifier  
Undervoltage Lockout  
Trimmed 5 Volt Reference  
The oscillator is programmed by the user’s selection of an external resis-  
tor and capacitor, and is designed for 300kHz typical operation.  
Externally Programmable Oscillator  
Charge Current  
The voltage and current amplifiers have 3.5MHz gain-bandwidth product  
to satisfy high performance system requirements.  
1.5A Peak Totem Pole Output  
The internal current sense amplifier permits the use of a low value current  
sense resistor, minimizing power loss. It has inputs and outputs accessi-  
ble to allow user-selection of gain-setting resistors, and is internally com-  
pensated for a gain of 5 and above. The command voltage input is  
buffered and provided for use as the reference for the current sense am-  
plifier.  
Available in 16-pin DIL or SOIC  
Packages  
The output of the voltage amplifier (input to the current amplifier) is  
clamped to 1 volt above the command voltage to serve as a current limit.  
The gate output can be disabled by bringing the CAO/ENBL pin to below  
0.8 volts.  
BLOCK DIAGRAM  
UDG-95098-2  
SLUS231 - JUNE 1998  

UC2886DG4 替代型号

型号 品牌 替代类型 描述 数据表
UC3886D TI

类似代替

Average Current Mode PWM Controller IC
UC3886N TI

类似代替

Average Current Mode PWM Controller IC
UC2886D TI

类似代替

Average Current Mode PWM Controller IC

与UC2886DG4相关器件

型号 品牌 获取价格 描述 数据表
UC2886DTR TI

获取价格

1.5A SWITCHING CONTROLLER, 115kHz SWITCHING FREQ-MAX, PDSO16, SOIC-16
UC2886J ETC

获取价格

Analog IC
UC2886N ETC

获取价格

Current-Mode SMPS Controller
UC288DW TI

获取价格

UC288DW
UC288DWTR TI

获取价格

UC288DWTR
UC288J TI

获取价格

UC288J
UC288L TI

获取价格

UC288L
UC288N TI

获取价格

UC288N
UC288Q TI

获取价格

UC288Q
UC288QTR TI

获取价格

UC288QTR