UC1860
UC2860
UC3860
Resonant Mode Power Supply Controller
FEATURES
DESCRIPTION
•
3MHz VFO Linear over 100:1 Range
The UC1860 family of control ICs is a versatile system for resonant mode
power supply control. This device easily implements frequency modulated
fixed-on-time control schemes as well as a number of other power supply
control schemes with its various dedicated and programmable features.
•
5MHz Error Amplifier with Controlled
Output Swing
•
Programmable One Shot Timer—
Down to 100ns
The UC1860 includes a precision voltage reference, a wide-bandwidth er-
ror amplifier, a variable frequency oscillator operable to beyond 3MHz, an
oscillator-triggered one-shot, dual high-current totem-pole output drivers,
and a programmable toggle flip-flop. The output mode is easily pro-
grammed for various sequences such as A, off, B, off; A & B, off; or A, B,
off. The error amplifier contains precision output clamps that allow pro-
gramming of minimum and maximum frequency.
•
•
•
•
•
•
Precision 5V Reference
Dual 2A Peak Totem Pole Outputs
Programmable Output Sequence
Programmable Under Voltage Lockout
Very Low Start Up Current
The device also contains an uncommitted comparator, a fast comparator
for fault sensing, programmable soft start circuitry, and a programmable
restart delay. Hic-up style response to faults is easily achieved. In addi-
tion, the UC1860 contains programmable under voltage lockout circuitry
that forces the output stages low and minimizes supply current during
start-up conditions.
Programmable Fault Management &
Restart Delay
•
Uncommitted Comparator
ABSOLUTE MAXIMUM RATINGS
Supply Voltage (pin 19) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20V Comparator Output Voltage (pin 15) . . . . . . . . . . . . . . . . . . 15V
Output Current, Source or Sink (pins 17 & 20) Soft Start or Restart Delay Sink Current (pins 22 & 23) . . . 5mA
DC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.8A Power Dissipation at TA = 50°C (DIP) . . . . . . . . . . . . . . . 1.25W
Pulse (0.5µs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0A Power Dissipation at TA = 50°C (PLCC) . . . . . . . . . . . . . . . . 1W
Power Ground Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±0.2V Lead Temperature (Soldering, 10 seconds) . . . . . . . . . . . 300°C
Inputs (pins 1, 2, 3, 4, 8, 9, 11, 12,
Note: All voltages are with respect to signal ground and all
currents are positive into the specified terminal.
Pin numbers refer to the DIP.
13, 14, 21, 22, 23 & 24) . . . . . . . . . . . . . . . . . . . . . . -0.4 to 6V
Error Amp Output Current, Source or Sink (pin 5). . . . . . . . 2mA
IVFO Current (pin 7). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2mA
Comparator Output Current (pin 15) . . . . . . . . . . . . . . . . . . 5mA
Refer to Packaging Section of Databook for thermal
limitations and considerations of packages.
BLOCK DIAGRAM
10/93