application
INFO
UC1706
UC2706
UC3706
available
Dual Output Driver
FEATURES
DESCRIPTION
•
•
•
•
•
Dual, 1.5A Totem Pole Outputs
40nsec Rise and Fall into 1000pF
Parallel or Push-Pull Operation
Single-Ended to Push-Pull Conversion
The UC1706 family of output drivers are made with a high-speed
Schottky process to interface between low-level control functions and
high-power switching devices - particularly power MOSFET's. These de-
vices implement three generalized functions as outlined below.
First: They accept a single-ended, low-current digital input of either polar-
ity and process it to activate a pair of high-current, totem pole outputs
which can source or sink up to 1.5A each.
High-Speed, Power MOSFET
Compatible
Second: They provide an optional single-ended to push-pull conversion
through the use of an internal flip-flop driven by double-pulse-
suppression logic. With the flip-flop disabled, the outputs work in parallel
for 3.0A capability.
•
•
•
•
•
•
•
•
Low Cross-Conduction Current Spike
Analog, Latched Shutdown
Internal Deadband Inhibit Circuit
Low Quiescent Current
Third: Protection functions are also included for pulse-by-pulse current
limiting, automatic deadband control, and thermal shutdown.
These devices are available in a two-watt plastic “bat-wing” DIP for op-
eration over a 0°C to 70°C temperature range and, with reduced power,
in a hermetically sealed cerdip for -55°C to +125°C operation. Also avail-
able in surface mount Q and L packages.
5 to 40V Operation
Thermal Shutdown Protection
16-Pin Dual-In-Line Package
20-Pin Surface Mount Package
TRUTH TABLE
OUT = INV and N.I.
OUT = INV or N.I.
INV
N.I
OUT
H
L
H
L
H
H
L
L
H
L
L
L
BLOCK DIAGRAM
SLUS200A - OCTOBER 1998 - REVISED APRIL 2001