Multi-rate 10-Gigabit DWDM 80km XFP
Transceivers with Digital Diagnostics
TXP1XGHL2xx
Pb
Product Description
The TXP1XGHL2xx DWDM XFP multi-rate fiber optic transceivers with digital
diagnostics monitoring functionality provide a quick and reliable interface
for 10Gbps DWDM applications. The diagnostic functions, alarm and warning
features as described in the XFP Multi-Source Agreement (MSA) are provided via
standard I2C serial interface. The transceivers are compliant with the XFP Multi-
Source Agreement and are designed to support SONET/SDH, 10G Ethernet, and
10G Fiber Channel data rates from 9.95Gb/s to 11.09Gb/s.
Each transceiver utilizes an electro-absorption modulator integrated laser with
an operating wavelength in full compliance with 100GHz (0.8nm) spacing
per the ITU-grid. The transceivers satisfy Class I Laser Safety requirements in
accordance with the U.S. FDA/CDRH and international IEC-60825 standards.
The transceivers connect to standard 30-pad XFP connectors for hot plug
capability. This allows the system designer to make configuration changes or
maintenance by simply plugging in different types of transceivers without
removing the power supply from the host system.
Features
Lead Free Design & Fully RoHS Compliant
The transmitter and receiver DATA interfaces are AC coupled Current Mode
Logic (CML). LV-TTL Transmitter Disable control input and Loss of Signal output
interfaces are also provided.
Compliant with XFP MSA
Compliant with OC-192/STM-64
Compliant with ITU-T G.709
The transceivers operate from +1.8V, +3.3V and +5.0V power supplies over a
operating case temperature range of -5°C to +70°C (Commercial), -5°C to +85°C
(Extended), or -40°C to +85°C (Industrial).
Support DWDM 10G Ethernet Applications
Support 10G Fiber Channel Applications
Digital Diagnostics Monitoring
Temperature-stabilized EML Transmitter
Low Power Consumption
Wide Case Operating Temperature Range
Transmission Distance up to 80km
Absolute Maximum Ratings
Parameter
Symbol
Minimum
Maximum
Units
TST
Storage Temperature
- 40
+ 85
°C
Commercial
Extended
Industrial
- 5
- 5
- 40
0
+ 70
+ 85
+ 85
+ 2.0
+ 3.6
+ 6.0
85
Operating Case Temperature 1
Supply Voltage
TOP
°C
V
VCC2
VCC3
VCC5
RH
- 0.2
- 0.2
0
2
Operating Relative Humidity
%
V
VIN
V CC
Input Voltage
1
0
Case temperature is measured on top side of XFP module
Non condensing
2
21737-0959. Rev.07. 2010-05-11
An Oplink Company