SMD Transient Voltage Suppressor
CCOOMMCCHHIIPP
www.comchip.com.tw
TV15C5V0 Thru TV15C171
Working Peak Reverse Voltage: 5.0 - 170 Volts
Power Dissipation: 1500 Watts
Features
Ideal for surface mount applications
Easy pick and place
SMC/DO-214AB
Plastic package has Underwriters Lab.
flammability classification 94V-0
Typical IR less than 1uA above 10V
0.124(3.15)
0.245(6.22)
0.220(5.59)
0.108(2.75)
Fast reponse time: typically less 1nS for
uni-direction, less than 5nS for bi-
directiona, from 0 V to BV min.
0.280(7.11)
0.260(6.60)
0.012(0.31)
0.006(0.15)
Mechanical data
0.103(2.62)
0.079(2.00)
0.008(0.20)
0.050(1.27)
0.030(0.76)
Case: JEDEC DO-214AB molded plastic
0.0203(0.10)
0.320(8.13)
0.305(7.75)
Terminals: solderable per MIL-STD-750,
method 2026
Dimensions in inches and (millimeter)
Polarity: Cathode band denoted
Mounting position: Any
Approx. Weight:0.21 gram
Maximum Ratings and Electrical Characterics
Rating at 25C ambient temperatureunless otherwise specified.
Single phase, halfwave, 60Hz, resistiveor inductive load.
For capacitive load, derate current by20%
Value
Symbol
Units
Characteristics
Peak Power Dissipationon 10/1000uS
1500
See Table 1
5.0
Waveform (Note 1, Fig. 1)
PPPM
Watts
Peak Pulse Currentof on 10/1000uS
Waveform (Note 1, Fig. 3)
A
IPPM
PM(AV)
Steady State PowerDissipation at
TL=75 C (Note2)
Watts
Peak Forfard SurgeCurrent, 8.3mS Single
Half Sine-Wave Superimposed on Rated
Load, Uni-Directional Only(Note 3)
IFSM
200
A
Maxinum Instantaneous ForwardVoltage
at 100A forUni-Directional only
(Note 3 &4)
VF
3.5/5.0
Volts
Tj
-55 to +150
Operation Junction Temperature Range
C
TSTG
-55 to +150
Storage Temperature Range
C
Note: 1. Non-RepetitiveCurrent Pulse, perFig. 3 andDerated above TA=25 C, perFig. 2.
2. Mounted on8.0x8.0 mm . Copper Pads toEach Terminal.
3. Measured on8.3 mS SingleHalf Sine-Wave or Equivalent SquareWave, Duty Cycle=4 Pulse perMinute Maximum.
4. VF=3.5V onTV15C5V0 thru TV15C900Devices and VF=5.0Von TV15C101 thruTV15C171.
Page 1
MDS0211016A