SMD Transient Voltage Suppressor
SMD Diodes Specialist
TV04A5V0-G Thru. TV04A171-G
Working Peak Reverse Voltage: 5.0 to 170 Volts
Power Dissipation: 400 Watts
RoHS Device
Features
DO-214AC (SMA)
-Ideal for surface mount applications.
-Easy pick and place.
0.180(4.57)
0.160(4.06)
-Plastic package has Underwriters Lab.
flammability classification 94V-0.
0.110(2.79)
0.086(2.18)
0.067(1.70)
0.051(1.29)
-Typical IR less than 1μA above 10V.
-Fast response time: typically less than 1nS for
uni-direction, less than 5nS for bi-direction,
from 0V to BV min.
0.209(5.31)
0.185(4.70)
0.012(0.31)
0.006(0.15)
Mechanical data
0.091(2.31)
0.067(1.70)
-Case: JEDEC DO-214AC, molded plastic.
0.008(0.20)
0.004(0.10)
0.059(1.50)
0.035(0.89)
-Terminals: solderable per MIL-STD-750,
method 2026.
Dimensions in inches and (millimeter)
-Polarity: Color band denotes cathode end.
-Approx. weight: 0.064 grams
Maximum Ratings and Electrical Characteristics
Ratings at 25 OC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Value
Characteristics
Symbol
Units
Peak power dissipation on 10/1000μS
waveform (Note 1, Fig. 1)
PPPM
400
Watts
Peak pulse current on 10/1000μS
IPPM
See Table 1
1.0
A
waveform (Note 1, Fig. 3)
Steady state power dissipation at TL=75
(Note 2)
OC
PM(AV)
Watts
Peak forward surge current, 8.3mS single
half sine-wave superimposed on rated
load, uni-directional only (Note 3)
IFSM
VF
40
A
V
Maximum instantaneous forward voltage
at 25.0A for uni-directional only (Note 3&4)
3.5
OC
OC
Maximum operating junction temperature
Storage temperature range
TJ
150
TSTG
-55 to +150
Notes:
1. Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C, per Fig. 2.
2
2. Mounted on 5.0×5.0mm copper pads to each terminal.
3. Lead temperature at TL=75 OC per Fig.5.
4. Measured on 8.3mS single half sine-wave for uni-directional devices only.
5. Peak pulse power waveform is 10/1000μS.
REV:B
Page 1
QW-BTV01
Comchip Technology CO., LTD.