.
Ordering information
AC-DC Power Supplies Bus Converter Power Module Type
TUN S 500
F
48 -O
5 6
TUNS500F
1
2
3
4
1Series name
2Single output
3Output wattage
4Universal Input
5Output voltage
R
6Optional
T : with Mounting hole
(f3.4 thru)
Y1: Outputvoltage adjustment
range ±±20 (Onlꢀ 4ꢁ8)
R1: with Remote ON/OFF
R±: with Remote ON/OFF
(Low standbꢀ power)
*Avoid short circuit between +BC/R and -BC. It maꢀ cause the failure of inside components.
*Keep TRM open, if output voltage adjustment is not necessarꢀ.
*If remote sensing is not necessarꢀ, connect between +8out & +S and between -8out & -S.
MODEL
MAX OUTPUT WATTAGE[W]
DC OUTPUT
TUNS500F12
504
12V 42A (Peak 55A)
TUNS500F28
504
28V 18A (Peak 24A)
TUNS500F48
504
48V 10.5A (Peak 14A)
SPECIFICATIONS
MODEL
TUNS500F12
ACꢁ5 - ±64 1f
TUNS500F28
TUNS500F48
VOLTAGE[V]
ACIN 100V 6.2tꢀp (Io=1220)
ACIN 200V 3.2tꢀp (Io=1220)
52/62 (47 - 63)
CURRENT[A]
FREQUENCY[Hz]
ACIN 100V ꢁ4tꢀp
ꢁ7tꢀp
92tꢀp
ꢁꢁtꢀp
92.5tꢀp
INPUT
EFFICIENCY[%]
ACIN 200V ꢁ6tꢀp
ACIN 100V 2.96tꢀp
POWER FACTOR (Io=100%)
ACIN 200V 2.93tꢀp
INRUSH CURRENT
LEAKAGE CURRENT[mA]
VOLTAGE[V]
Limited bꢀ external resistance
2.75max (ACIN ±428 62Hz, Io=1220, According to IEC62952-1)
1±
±ꢁ
4ꢁ
*
3
CURRENT[A]
LINE REGULATION[mV]
LOAD REGULATION[mV]
4± (Peak 55)
±4max
±4max
1ꢁ (Peak ±4)
56max
56max
12.5 (Peak 14)
96max
96max
*1
*1
*1
*1
0 to +100C
RIPPLE[mVp-p]
-40 to 0C
1±2max
152max
152max
±22max
1ꢁ2max
±22max
±22max
322max
±ꢁ2max
562max
92max
±52max
322max
322max
452max
4ꢁ2max
962max
1ꢁ2max
TUNS
0 to +100C
RIPPLE NOISE[mVp-p]
-40 to 0C
OUTPUT
0 to +65C 1±2max
-40 to +100C ±42max
TEMPERATURE REGULATION[mV]
*
±
DRIFT[mV]
42max
Fixed (TRM pin open), adjustable bꢀ external resistor or external signal
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
9.62 - 14.42
±±.42 - 33.62
±7.56 - ±ꢁ.44
3ꢁ.42 - 5±.ꢁ2 (-Y1 Option : 3ꢁ.4 - 57.6)
47.±4 - 4ꢁ.76
OUTPUT VOLTAGE SETTING[V]
11.91 - 1±.±9
OVERCURRENT PROTECTION Works over 1210 of peak current and recovers automaticallꢀ
PROTECTION
CIRCUIT AND
OTHERS
OVERVOLTAGE PROTECTION[V] 15.22 - 16.ꢁ2
35.22 - 39.±2
55.±2 - 64.ꢁ2 (-Y1 Option : 62.2 - 67.±)
REMOTE SENSING
REMOTE ON/OFF
INPUT-OUTPUT-RC
INPUT-FG
OUTPUT-RC-FG
OUTPUT-RC
Provided
Optional (External power supplꢀ is required)
*
5
AC3,2228 1minute, Cutoff current = 12mA, DC5228 52MWmin (±2 15C)
AC±,2228 1minute, Cutoff current = 12mA, DC5228 52MWmin (±2 15C)
AC5228 1minute, Cutoff current = 122mA, DC5228 52MWmin (±2 15C)
AC1228 1minute, Cutoff current = 122mA, DC1228 12MWmin (±2 15C)
ISOLATION
*
*
5
5
OPERATING TEMP.,HUMID.AND ALTITUDE -42 to +122C(On aluminum base plate), ±2 - 950RH (Non condensing) (Refer to DERATING CUR8E), 3,222m (12,222 feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -42 to +122C, ±2 - 950RH (Non condensing), 9,222m (32,222 feet) max
ENVIRONMENT
±
VIBRATION
12 - 55Hz, 49.2m/s (5G), 3minutes period, 62minutes each along X, Y and Z axis
±
IMPACT
196.1m/s (±2G), 11ms, once each along X, Y and Z axis
AGENCY APPROVALS
HARMONIC ATTENUATOR
CASE SIZE/WEIGHT
COOLING METHOD
UL62952-1, C-UL (CSA62952-1), EN62952-1
SAFETY AND
NOISE REGULATIONS
*4
Complies with IEC61222-3-± (Class A)
117.3X1±.7X61.5mm [4.62X2.5X±.4± inches
Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink)
]
(WXHXD) / 192g max
OTHERS
*1 Refer to instruction manual for measuring method of electric characteristics.
*± Drift is the change in DC output for an eight hour period after a half-hour warm-up at ±5C, with the input voltage held constant at the rated input/output.
*3
(
) means peak current. Avoid operating with peak current continuouslꢀ. It maꢀ cause failure of the components inside the product.
There are limitation of available condition of the peak current, such as peak time, dutꢀ etc. (Refer to the instruction manual in detail.)
*4 Please contact us about another class.
*5 ”RC” is applicable when remote control (optional) is added.
TUNS-8
5秒后页面跳转
CP2102资料手册解读：CP2102引脚说明、关键参数分析
资料手册解读：UC3842参数和管脚说明
一文带你了解无源晶振的负载电容为何要加两颗谐振电容CL1和CL2
玻璃管保险丝与陶瓷管保险丝：区别与替代性探讨
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
