1
Optoway
TRSL-7380CG
***********************************************************************************************************************************************************************
TRSL-7380CG / TRSL-7380G / TRSL-7380ACG / TRSL-7380AG
3.3V / 1550 nm / 1.25 Gbps RoHS Compliant SFF LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex LC Single Mode Transceiver
l IEEE 802.3z 1000BASE-ZX Compliant
l Fiber Channel 1X SM-LC-L FC-PI Compliant
l Small Form Factor, RJ-45 size, 2X5 pin Package
l 1550 nm DFB LD Transmitter
The TRSL-7380CG series single mode transceivers is small
form factor, low power, high performance module for
bi-directional serial optical data communications such as
IEEE 802.3z Gigabit Ethernet 1000BASE-ZX and Fiber
Channel 1X SM-LC-L FC-PI. This module is designed for
single mode fiber and operates at a nominal wavelength of
1550 nm. A guaranteed minimum optical link budget of 24
dB is offered which can correspond to a link distance of
over 80 km (assuming worst case fiber loss of 0.25 dB/km).
The transmitter section uses a multiple quantum well
DFB laser and is a class 1 laser compliant according to
International Safety Standard IEC-60825. The receiver
section uses an integrated InGaAs detector preamplifier
(IDP) mounted in an optical header and a limiting
post-amplifier IC. A LVPECL logic interface simplifies
interface to external circuitry.
l 24 dB Power Budget at Least
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detect Output :TRSL-7380CG
l LVPECL Signal Detect Output :TRSL-7380G
l Single +3.3 V Power Supply
l 0 to 70oC Operating : TRSL-7380CG
l -20 to 85oC Operating : TRSL-7380ACG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
LASER SAFETY
APPLICATIONS
l Gigabit Ethernet Switches and Routers
l Fiber Channel Switch Infrastructure
l Metro Edge Switching
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
1000
BASE
Distance Wavelengt Package
Temp. TX Power RX Sens.
RoHS
(km)
h (nm)
(oC)
(dBm)
5 to 0
5 to 0
(dBm) Cpmpliant
TRSL-7380CG
1.25/1.063
1.25/1.063
ZX
ZX
80
1550 DFB 2X5 LC
1550 DFB 2X5 LC
0 to 70
-20 to 85
-24
-24
Yes
Yes
TRSL-7380ACG
80
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
85
Units
Notes
Storage Temperature
Operating Temperature
Tstg
Topr
-40
0
oC
oC
70
TRSL-7380CG
-20
85
TRSL-7380ACG
Soldering Temperature
Power Supply Voltage
Input Voltage
---
Vcc
---
260
4.5
Vcc
oC
V
10 seconds on leads only
0
GND
0
V
Output Current
Iout
30
mA
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Symbol
Min
Typ
Max
Units / Notes
Vcc
3.13
0
-20
3.3
3.47
70
85
V
Topr
oC / TRSL-7380CG
oC / TRSL-7380ACG
air flow 1m/sec
Mb/s
Data Rate
Power Supply Current
1000
1250
200
Icc
280
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 V2.0