1
Optoway
TRS-73180G
***********************************************************************************************************************************************************************
TRS-73180G / TRS-73180CG / TRS-73180TG / TRS-73180CTG / TRS-73180FG / TRS-73180CFG
3.3V / 1550 nm / 1.25 Gbps RoHS Compliant Optical Single-Mode Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Duplex SC Single Mode Transceiver: TRS-73180G
l Duplex ST Single Mode Transceiver: TRS-73180TG
l Duplex FC Single Mode Transceiver: TRS-73180FG
l Compliant with IEEE-802.3z Gigabit Ethernet
l 1550 nm DFB LD Transmitter
The TRS-73180G series single mode transceivers is low
power, high performance module for bi-directional serial
optical data communications such Gigabit Ethernet and
Fibre Channel. This module is designed for single mode
fiber and operates at a nominal wavelength of 1550 nm. A
guaranteed minimum optical link budget of 38 dB is
offered which can correspond to a link distance of over 180
km (assuming worst case fiber loss of 0.20 dB/km). The
transmitter section uses a multiple quantum well laser
and is a class 1 laser compliant according to International
Safety Standard IEC-60825. The receiver section uses an
integrated InGaAs Avalanche photodetector preamplifier
(IDP) mounted in an optical header and a limiting
post-amplifier IC. A PECL logic interface simplifies
interface to external circuitry.
l High Sensitivity APD Receiver
l 38 dB Power Budget At Least
l Distance up to 160 km
l 0 to 70oC Operating
l Industry Standard 1 x 9 Footprint
l Single +3.3V Power Supply
l RoHS Compliant
l LVPECL Signal Detect Output: TRS-73180G
l LVTTL Signal Detect Output: TRS-73180CG
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC 60825
Compliant
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l Switch to Switch Interface
l High Speed Interface for File Servers
l High Performance Desktops
ORDER INFORMATION
P/No.
Bit Rate IEEE Distance Wavelength Voltage
Package
Temp. TX Power RX Sens. RoHS
(Mb/s)
802.3z
(km)
(nm)
(V)
(oC)
(dBm)
(dBm) Compliant
TRS-73180G
1250
EZX
180
1550 DFB
3.3
1X9 SC
0 to 70
6 to 3
-35 Yes
Note: TRS-XXXXXFG for FC duplex transceiver, TRS-XXXXXTG for ST duplex transceiver, TRS-XXXXX-EMG for SC duplex
transceiver with extended EMI shielding, TRS-XXXXXCXG for transceiver with TTL signal detection output.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Soldering Temperature
Power Supply Voltage
Input Voltage
Symbol
Tstg
Topr
---
Min
-40
0
Max
85
Units
oC
Notes
70
oC
260
4.5
Vcc
oC
10 seconds on leads only
Vcc
---
0
V
V
GND
Output Current
Iout
0
30
mA
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Data Rate
Symbol
Min
3.13
0
Typ
Max
3.47
70
Units
V
Vcc
Topr
3.3
oC
1250
1300
280
Mb/s
mA
Power Supply Current
Icc
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
7/1/2008 V1.0