TRF2443
www.ti.com ................................................................................................................................... SLWS217A–SEPTEMBER 2009–REVISED SEPTEMBER 2009
Integrated IF Transceiver for Broadband Wireless Applications
1
FEATURES
DESCRIPTION
•
Integrated TX Chain (165–175 MHz / 330–350
MHz)
The TRF2443 is a highly integrated full-duplex
intermediate frequency (IF) transceiver designed for
broadband point-to-point wireless communications
–
–
–
–
–
Baseband Amplifiers
Quadrature Modulator
applications. The receiver chain integrates
a
Digitally Controlled VGA
TX Output IP3: 29.5 dBm
TX Output Noise: –166 dBc/Hz
quadrature (IQ) demodulator and provides more than
90 dB of gain range, obtained via a combination of
analog- and digital-controlled VGAs. The integrated
programmable baseband low-pass filter gives the
TRF2443 the flexibility to receive signals with different
bandwidths, while also helping to remove interferer
signals before they reach the ADC. Additionally, the
TRF2443 gives the flexibility to add an external IF
filter to further remove unwanted signals. The
TRF2443 transmitter chain integrates a quadrature
(IQ) modulator driving a highly linear IF DVGA that
provides 35 dB of gain range controlled via a serial
programming interface (SPI). The TRF2443 includes
the two synthesizers for the receiver and transmitter
chains, removing the need for external LO generation
circuitry and simplifying the implementation of a
frequency-division duplexing (FDD) transceiver
•
Integrated RX Chain (140–165 MHz / 280–330
MHz)
–
–
–
–
–
–
–
–
IF Amplifiers
Analog and Digital VGA
Quadrature Demodulator
Baseband Filters
ADC Buffers
IF SAW Filter Bypass
RX Noise Figure: 4.3 dB
RX Input IP3: 9.5 dBm
•
•
Integrated TX and RX Synthesizers
design.
The
TRF2443
also
provides
Integrated Cross-Polarization Interference
Cancellation (XPIC) Support
cross-polarization interference cancellation (XPIC)
support via an integrated XPIC output amplifier and
receiver chain. The TRF2443 is an ideal building
block for implementing the IF transceiver function in
the indoor unit (IDU), which is connected via a coaxial
cable interface to the outdoor unit (ODU), of a
point-to-point microwave backhaul split-architecture
system.
•
Auxiliary RX Chain
APPLICATIONS
•
•
•
•
Wireless Microwave Backhaul
Point-to-Point Microwave
Broadband Wireless Applications
WiMAX IF Transceiver
IF SAW
XPIC
AGC
XPIC
OUT
IF_OUT
IF_IN
RXAGC
XPIC_IN
XPIC_BBI
0/90
AGC
CNTL
XPIC_BBQ
RXBBI
from RXPLL
IFAMP
RX_IN
0/90
RXBBQ
RX VGA
Temperature
Sensor
TEMPOUT
VCCs
CLKSPI
DATASPI
LESPI
S
P
I
RXPLL
3
From SPI
7
TXI_IN
TX VGA
TX_OUT
GNDs
TXPLL
0/90
TXQ_IN
Level
Detect
TX_PWD
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009, Texas Instruments Incorporated