200W TRC-200 Series
Switch Mode LED Drivers
Constant Current
Aluminum Housing
Electrical Specifications
Input Voltage Range:
100 - 277 Nom. Vac (90 - 305 V Min/Max)
Frequency:
50/60 Hz Nom. (47-63 Hz Min/Max)
>0.90 @ full load, 100V through 277V
Power Factor:
Inrush Current:
Input Current:
65 Amps maximum @ 230 Vac, cold start 25ºC
2.4 A max 100Vac, 1.2 A max 220Vac
Maximum Power:
Line Regulation:
Load Regulation:
Leakage Current:
Typical Efficiency
Turn-on Delay:
Ripple and Noise:
Protection:
200W
± 1%
± 3%
1 mA 277 Vac 60Hz
89-91% at 277Vac
0.5S typical 110Vac, 0.3S typical 220Vac
3% Vo
• Total Power: 120 Watts
Over-Voltage, Over-Temperature (110°C), Lightning,
and Short Circuit Protection with Self Recovery
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• IP67
• High Efficiency
• High Power Factor with Active Correction
• Output and Lightning Protection
Environmental Specifications
Minimum Starting Temp: -35ºC
Storage Temperature:
Humidity:
-40ºC to +85ºC
5% to 100%
Convection
Class A
Cooling:
Sound Rating:
MTBF:
330,000 Hours (450 mA model) @ 110Vac input, 80%
load and 25ºC ambient conditions per MIL-HDBK-217F
Lifetime:
Weight:
60,000 Hours @ 220Vac, 80% load and 45ºC ambient
3.31 lbs. (1.5 kg)
Standard Versions - Product Specifications
Output Current Output Voltage Max. Output
Typical
Efficiency
Model Number
(mA)*
450
Range (Vdc)
267-445
171-285
114-190
85-142
68-114
57-95
Power (W)
200
Safety and EMC Compliance
TRC-200S045ST
TRC-200S070ST
TRC-200S105ST
TRC-200S140ST
TRC-200S175ST
TRC-200S210ST
TRC-200S245ST
TRC-200S280ST
TRC-200S315ST
TRC-200S350ST
TRC-200S420ST
TRC-200S490ST
TRC-200S560ST
TRC-200S630ST
TRC-200S833ST
93%
93%
92%
92%
92%
91%
91%
91%
91%
90%
90%
90%
89%
89%
88%
UL8750, Compliance to UL1012,
CAN/CSA-C22.2 No. 0, CSA-C22.2 No. 107.1-01, CSA-C22.2 No. 250.0
700
200
UL/CUL
1050
1400
1750
2100
2450
2800
3150
3500
4200
4900
5600
6300
8330
200
C E
EN 61347-1, EN61347-2-13
200
EN 55015
Conducted emission Test & Radiated emission Test
200
EN 61000-3-2 Harmonic current emissions
200
EN 61000-3-3 Voltage fluctuations & flicker
48-81
200
EN 61000-4-2 Electrostatic Discharge (ESD): 8 kV air discharge, 4 kV contact discharge
EN 61000-4-3 Radio-Frequency Electromagnetic Field Susceptibility Test-RS
EN 61000-4-4 Electrical Fast Transient / Burst-EFT
42-71
200
38-63
200
34-57
200
EN 61000-4-5 Surge Immunity Test: AC Power Line: line to line 4 kV, line to earth 6 kV
EN 61000-4-6 Conducted Radio Frequency Disturbances Test-CS
EN 61000-4-8 Power Frequency Magnetic Field Test
28-47
200
24-40
200
21-35
200
EN 61000-4-11 Voltage Dips
19-32
200
EN 61547
Electromagnetic Immunity Requirements Applies to Lighting Equipment
14-24 Vc
200
* The output current is adjustable at factory from 50% to 100%.
E332160
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Rev 9-1-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com