TR3
Vishay Sprague
www.vishay.com
Solid Tantalum Surface Mount Chip Capacitors
®
TANTAMOUNT , Molded Case, Low ESR
FEATURES
• Low ESR
• 100 ꢀ surge current tested (C, D, and E case
sizes)
• Molded case available in seven case codes
• High ripple current carrying capability
Available
Available
• Terminations: 100 ꢀ matte tin, standard tin/lead available
• Compatible with “High Volume” automatic pick and place
equipment
• Compliant terminations
• Meets IEC specification QC300801/US0001 and
EIA535BAAC mechanical and performance requirements
• Moisture sensitivity level 1
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PERFORMANCE CHARACTERISTICS
www.vishay.com/doc?40088
Operating Temperature: - 55 °C to + 125 °C
(above 85 °C, voltage derating is required)
Capacitance Range: 0.47 μF to 1000 μF
Capacitance Tolerance: 10 ꢀ, 20 ꢀ
Voltage Rating: 4 VDC to 63 VDC
Note
*
This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
APPLICATIONS
• Industrial
• Telecom infrastructure
• Consumer
• Computer
• General purpose
ORDERING INFORMATION
TR3
D
107
K
010
C
0100
TYPE
CASE CODE
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING AT + 85 °C
TERMINATION AND
PACKAGING
ESR
See Ratings
and Case
Codes table
This is expressed in
picofarads. The first
two digits are the
significant figures.
The third is the
K = 10 ꢀ
M = 20 ꢀ
This is expressed
in V. To complete
the three-digit
block, zeros precede
the voltage rating.
A decimal point is
indicated by an “R”
(6R3 = 6.3 V).
C = Matte tin/7"
(178 mm) reels
D = Matte tin/13"
(330 mm) reels
E = Tin/lead/7"
(178 mm) reels
F = Tin/lead/13"
(330 mm) reels
Maximum 100 kHz
ESR in m.
See note below.
number of zeros
to follow.
Notes
•
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
Voltage substitutions will be marked with the higher voltage rating.
Low ESR solid tantalum chip capacitors allow delta ESR of 1.25 times the datasheet limit after mounting.
•
Dry pack is available per request, contact regional marketing.
Revision: 19-Jul-13
Document Number: 40080
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000