Surface Mount Transient Voltage Suppressors
TVS diodes can be used in a wide range of applications which
like consumer electronic products, automotive industries,
munitions, telecommunications, aerospace industries, and
intelligent control systems.
Working Voltage: 12 to 100 V
Peak Pulse Power: 400 W
Glass passivated chip
400W peak pulse power capability with a 10/1000
uA waveform, repetitive rate (duty cycle):0.01 %
High reliability application and automotive grade AEC
Q101 qualified
Case: Molded plastic
Epoxy: UL 94V-0 rate flame retardant
Lead: Solderable per MIL-STD-750, method
2026 guranteed
Low leakage
Polarity: Color band denotes cathode end except
Bipolar
Uni and Bidirectional unit
Excellent clamping capability
Very fast response time
Mounting position: Any
RoHS compliant
TVS devices are ideal for the protection of I/O interfaces, VCC
bus and other vulnerable circuits used in Telecom, Computer,
Industrial and Consumer electronic applications.
Parameter
Symbol
PPPM
Value
Units
Peak power dissipation with a 10/1000μs waveform(1)
400
W
Power Dissipation on Infinite Heat Sink at TL=75°C
PD
1.0
W
A
Peak pulse current with a 10/1000μs waveform(1)
I PP
See Next Table
Operating junction and storage temperature range (VBR ≤ 47V)
-55 to +175
-55 to +150
°C
°C
T J , T STG
Operating junction and storage temperature range (VBR > 47V)
Maximum instantaneous forward voltage at 25 A for unidirectional
only
3.5
40
V
A
VF
Peak forward surge current, 8.3 ms single half sine-wave
unidirectional only(2)
IFSM
Note:
(1)Non-repetitive current pulse per Fig.5 and derated above TA= 25℃per Fig.1
(2)Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
@ UN Semiconductor Co., Ltd. 2018
Specifications are subject to change without notice.
Revision July 18, 2018
1 / 4
Please refer to www.unsemi.com.tw for current information.