TPS7B82-Q1
SLVSDQ0H – SEPTEMBER 2017 – REVISED MARCH 2021
TPS7B82-Q1 300-mA High-Voltage Ultralow-IQ Low-Dropout Regulator
1 Features
3 Description
•
•
•
AEC-Q100 qualified for automotive applications:
– Temperature grade 1: –40°C ≤ TA ≤ 125°C
– Temperature grade 0: –40°C ≤ TA ≤ 150°C
Extended junction temperature range:
– Grade 1: –40°C ≤ TJ ≤ 150°C
– Grade 0: –40°C ≤ TJ ≤ 165°C
Low quiescent current IQ:
– 300-nA shutdown IQ
– 2.7 µA typical at light loads
– 5 µA maximum at light loads
3-V to 40-V wide VIN input voltage range with up to
45-V transient
In automotive battery-connected applications, low
quiescent current (IQ) is important to save power and
extend battery lifetime. It is especially necessary to
have ultralow IQ for always-on systems.
The TPS7B82-Q1 is a low-dropout linear regulator
designed to operate with a wide input-voltage range
from 3 V to 40 V (45-V load dump protection).
Operation down to 3 V allows the TPS7B82-Q1 to
continue operating during cold-crank and start and
stop conditions. With only 2.7-µA typical quiescent
current at light load, this device is an optimal solution
for powering microcontrollers (MCUs) and CAN/LIN
transceivers in standby systems.
•
•
•
•
Maximum output current: 300 mA
2% output-voltage accuracy
The device features integrated short-circuit and
overcurrent protection. This device operates in
ambient temperatures from –40°C to 125°C and
with junction temperatures from –40°C to 150°C.
Additionally, this device uses a thermally conductive
package to enable sustained operation despite
significant dissipation across the device. Because of
these features, the device is well suited as a power
supply for various automotive applications.
Maximum dropout voltage: 700 mV at 200-mA load
current for fixed 5-V output version
Stable with low-ESR (0.001-Ω to 5-Ω) ceramic
output-stability capacitor (1 µF to 200 µF)
Fixed 2.5-V, 3.3-V, and 5-V output voltage
Packages:
– 8-pin HVSSOP, RθJA = 63.9°C/W
– 6-pin WSON, RθJA = 72.8°C/W
– 5-pin TO-252, RθJA = 31.1°C/W
– 14-pin HTSSOP, RθJA = 52.0°C/W
•
•
•
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
3.00 mm × 3.00 mm
2.00 mm × 2.00 mm
6.10 mm × 6.60 mm
5.00 mm x 4.40 mm
HVSSOP (8)
WSON (6)
2 Applications
TPS7B82-Q1
TO-252 (5)
HTSSOP (14)
•
•
•
•
•
Automotive head units
Telematics control units
Headlights
Body control modules
Inverter and motor controls
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
IN
OUT
V
V
REG
BAT
C
C
OUT
IN
TPS7B82-Q1
EN
Typical Application Schematic
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.