Support &
Community
Product
Folder
Order
Now
Tools &
Software
Technical
Documents
TPS7A85A
SBVS313 –JUNE 2017
TPS7A85A 4-A, High-Accuracy (0.75%), Low-Noise (4.4 μVRMS), LDO Regulator
1 Features
3 Description
The TPS7A85A is a low-noise (4.4 μVRMS), low
dropout linear regulator (LDO) capable of sourcing 4
A with only 240 mV of maximum dropout. The device
output voltage is pin-programmable from 0.8 V to
3.95 V and adjustable from 0.8 V to 5.1 V using an
external resistor divider.
1
•
Low Dropout: 150 mV (Typical) at 4 A
•
0.75% (Maximum) Accuracy Over Line, Load, and
Temperature With BIAS
•
Output Voltage Noise:
–
–
4.4 μVRMS at 0.8-V Output
7.7 μVRMS at 5.1-V Output
The combination of low-noise (4.4 μVRMS), high-
PSRR, and high output current capability makes the
•
Input Voltage Range:
TPS7A85A
ideal
to
power
noise-sensitive
–
–
Without BIAS: 1.4 V to 6.5 V
With BIAS: 1.1 V to 6.5 V
components such as those found in high-speed
communications, video, medical, or test and
measurement applications. The high performance of
the TPS7A85A limits power-supply-generated phase
noise and clock jitter, making this device ideal for
powering high-performance serializer and deserializer
(SerDes), analog-to-digital converters (ADCs), digital-
to-analog converters (DACs), and RF components.
Specifically, RF amplifiers benefit from the high-
performance and 5.1-V output capability of the
device.
•
•
•
ANY-OUT™ Operation:
Output Voltage Range: 0.8 V to 3.95 V
Adjustable Operation:
Output Voltage Range: 0.8 V to 5.1 V
Power-Supply Ripple Rejection:
40 dB at 500 kHz
–
–
–
•
•
•
•
Excellent Load Transient Response
Adjustable Soft-Start In-Rush Control
Open-Drain Power-Good (PG) Output
For digital loads (such as application-specific
integrated circuits (ASICs), field-programmable gate
arrays (FPGAs), and digital signal processors
(DSPs)) requiring low-input voltage, low-output (LILO)
voltage operation, the exceptional accuracy (0.75%
over load and temperature), remote sensing,
excellent transient performance, and soft-start
capabilities of the TPS7A85A ensure optimal system
performance.
Stable with a 47-μF or Larger Ceramic Output
Capacitor
•
•
θJC = 3.4°C/W
3.5-mm × 3.5-mm, 20-Pin VQFN
2 Applications
The versatility of the TPS7A8500A makes the device
•
•
•
Digital Loads: SerDes, FPGAs, and DSPs
Instrumentation, Medical, and Audio
High-Speed Analog Circuits:
a
component of choice for many demanding
applications.
Device Information(1)
–
VCO, ADC, DAC, and LVDS
PART NUMBER
PACKAGE
BODY SIZE (NOM)
•
•
Imaging: CMOS Sensors and Video ASICs
Test and Measurement
TPS7A85A
VQFN (20)
3.50 mm × 3.50 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Powering RF Components
Powering Digital Loads
TPS7A85A
CBIAS
Bias
Supply
Input Supply
OUT
IN
PG
1.4 VIN
IN
BIAS
CIN
EN
PG
OUT
SNS
FB
VCC
VCC
RPG
0.9 VOUT
To Digital
Load
NR/SS
EN
COUT
CNR/SS
IQ Modulators
IQ Demodulators
TPS7A85A
1.6 V
TRF372017
TRF3722
TRF371125
TRF371135
CFF
800 mV
400 mV
200 mV
100 mV
50 mV
ANYOUT
Used to set
voltage
Copyright © 2017, Texas Instruments Incorporated
GND
Copyright © 2017, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.