TPS77301, TPS77318, TPS77327, TPS77328, TPS77333 WITH RESET OUTPUT
TPS77401, TPS77418, TPS77427, TPS77428, TPS77433 WITH POWER GOOD OUTPUT
250-mA LDO REGULATORS WITH INTEGRATED RESET OR PG
SLVS281A – FEBRUARY 2000 – REVISED MARCH 2000
TPS773xx
Open Drain Power-On Reset With 220-ms
Delay (TPS773xx)
DGK PACKAGE
(TOP VIEW)
Open Drain Power-Good (PG) Status
Output (TPS774xx)
FB/SENSE
RESET
EN
OUT
OUT
IN
1
2
3
4
8
7
6
5
250-mA Low-Dropout Voltage Regulator
Available in 1.8-V, 2.7-V, 2.8-V, 3.3-V, Fixed
Output and Adjustable Versions
GND
IN
Dropout Voltage Typically 200 mV
at 250 mA (TPS77333, TPS77433)
TPS774xx
DGK PACKAGE
(TOP VIEW)
Ultra Low 92-µA Quiescent Current (Typ)
FB/SENSE
PG
OUT
OUT
IN
1
2
3
4
8
7
6
5
8-Pin MSOP (DGK) Package
Low Noise (55 µV
) Without an External
rms
EN
Filter (Bypass) Capacitor (TPS77318,
TPS77418)
GND
IN
2% Tolerance Over Specified Conditions
For Fixed-Output Versions
TPS77x33
Fast Transient Response
DROPOUT VOLTAGE
vs
Thermal Shutdown Protection
See the TPS779xx Family of Devices for
Active High Enable
JUNCTION TEMPERATURE
300
description
250
200
150
I
O
= 250 mA
The TPS773xx and TPS774xx are low dropout
regulators with integrated power-on reset and
power good (PG) function respectively. These
devicesarecapableofsupplying250mAofoutput
current with a dropout of 200 mV (TPS77333,
TPS77433). Quiescent current is 92 µA at full load
dropping down to 1 µA when device is disabled.
These devices are optimized to be stable with a
wide range of output capacitors including lowESR
ceramic (10 µF) or low capacitance (1 µF)
tantalum capacitors. These devices have ex-
100
I
O
= 10 mA
50
0
I
O
= 0 A
tremely low noise output performance (55 µV
)
rms
without using any added filter capacitors.
TPS773xx and TPS774xx are designed to have
fast transient response for larger load current
changes.
–40
0
40
80
120
140
T
J
– Junction Temperature – °C
The TPS773xx or TPS774xx is offered in 1.8-V, 2.7-V, 2.8-V and 3.3-V fixed-voltage versions and in an
adjustable version (programmable over the range of 1.5 V to 5.5 V). Output voltage tolerance is 2% over line,
load, and temperature ranges. The TPS773xx and TPS774xx families are available in 8-pin MSOP (DGK)
packages.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2000, Texas Instruments Incorporated
This document contains information on products in more than one phase
of development. The status of each device is indicated on the page(s)
specifying its electrical characteristics.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265